The information on this page was generated on Sat Aug 29 06:28:56 2026 (America/Los_Angeles). You may click the button below to manually regenerate the content.
Basic Information for DSG2608_X_030_C_H6
Brief description of DB components associated to this Hybrid Assembly and associated tests
Shown below are results for the glue weight measurements
IService::UPLOADDB INFO Working on test code ASIC_GLUE_WEIGHT
GlueWeightSvc::uploadDB INFO Formatting database test for ASIC_GLUE_WEIGHT
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION
IService::log INFO Logging status 0111 for component DSG2608_X_030_C_H6
IService::install INFO Installing output directory to /home/data/modules/DSG2608_X_030_C_H6/GlueWeightHybridASIC_PROD_v2-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed 20USBHX2008035_image.jpg...
IService::install INFO Installed DB_COMMENTS.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_ASIC_GLUE_WEIGHT.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_VISUAL_INSPECTION.json...
IService::install INFO Installed DSG2608_X_030_C_H6.root...
IService::install INFO Installed status.json...
TopControl::monitor INFO Service with algoirthm name GlueWeightModule_LS_PPA ignored through users request!
TopControl::monitor INFO Service with algoirthm name GlueWeightModule_SS_PPA ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridBonding_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleBonding_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPullTest ignored through users request!
TopControl::monitor INFO Service with algoirthm name PullTestCicorelCard ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridFlexArray_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name Powerboards_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ABC_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ABC_Wafer_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HCC_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorBondingQC_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HVTabSheet_SheerTest_Before_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HVTabSheet_SheerTest_After_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name PhotoUpload ignored through users request!
TopControl::monitor INFO Service with algoirthm name PictureModule ignored through users request!
TopControl::monitor INFO Service with algoirthm name GeneralPictures ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_PreTabIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_PostTabIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_Module_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_AMACIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SixWayJig_Y_slots ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPanelMetrology ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPanelMetrology_v7 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology_v8 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology_Y_v8 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_v10 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_v10-beta ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2_thick_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_Y_v0_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleLS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleSS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PROD_v2 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalModules_PPA_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name TCModules_PROD_v0 ignored through users request!
Metadata
Value
Component type
Operator
LM, AS
Date
2026-07-17T22:27:56.013+00:00
Program
ASIC_X_PPB.src
Field
Weight/Volume
Assummed density of glue
1.077
Total volume of ASIC glue [uL]
41.697
Volume per glue dot [nL]
801.869
Weight of glue under ASICs [mg]
44.900
Weights of bare hybrid [g]
2.514
Weights of stuffed hybrid [g]
2.559
Metrology results
Shown below are the results of the module metrology scans
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_0] Height in z : 462.281000 +/- 5.623500 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_0] Height in z : 65.805000 +/- 9.756129 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 396.476000
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 96.476000 +/- 12.320950 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 397.476000 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_1] Height in z : 456.584250 +/- 2.283000 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_1] Height in z : 65.908111 +/- 6.964333 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 390.676139
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 90.676139 +/- 8.872093 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 391.676139 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_2] Height in z : 449.903000 +/- 2.271750 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_2] Height in z : 72.768000 +/- 7.877000 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 377.135000
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 77.135000 +/- 9.602498 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 378.135000 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_3] Height in z : 445.047750 +/- 1.022250 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_3] Height in z : 64.883444 +/- 7.383000 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 380.164306
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 80.164306 +/- 8.975170 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 381.164306 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_4] Height in z : 441.787500 +/- 0.589250 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_4] Height in z : 63.725222 +/- 8.066667 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 378.062278
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 78.062278 +/- 9.508855 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 379.062278 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_5] Height in z : 440.224250 +/- 1.219750 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_5] Height in z : 70.170000 +/- 6.086833 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 370.054250
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 70.054250 +/- 7.971031 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 371.054250 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_6] Height in z : 438.154500 +/- 0.388750 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_6] Height in z : 64.208778 +/- 7.669000 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 373.945722
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 73.945722 +/- 9.163225 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 374.945722 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_7] Height in z : 438.164250 +/- 0.310750 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_7] Height in z : 61.436778 +/- 7.956000 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 376.727472
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 76.727472 +/- 9.401835 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 377.727472 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_8] Height in z : 442.498250 +/- 1.231500 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_8] Height in z : 74.875667 +/- 7.615500 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 367.622583
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 67.622583 +/- 9.193064 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 368.622583 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_9] Height in z : 445.818500 +/- 2.632500 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_9] Height in z : 60.508500 +/- 9.510409 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 385.310000
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 85.310000 +/- 11.062456 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 386.310000 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [HCC_X_0] Height in z : 444.638750 +/- 2.084750 um
MetrologySvc::analyzeGlueHeights INFO ----> [HCC_X_0] Height in z : 64.981375 +/- 6.287593 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 379.657375
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 300.000000 +/- 5.000000 extra material : 79.657375 +/- 8.299398 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 380.657375 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeHybridThickness INFO Total stack up 941.381500, chip thickness 300.000000 and glue 96.476000, giving hybrid 544.905500 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 934.671121, chip thickness 300.000000 and glue 90.676139, giving hybrid 543.994982 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 930.436028, chip thickness 300.000000 and glue 77.135000, giving hybrid 553.301028 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 927.742180, chip thickness 300.000000 and glue 80.164306, giving hybrid 547.577875 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 927.248793, chip thickness 300.000000 and glue 78.062278, giving hybrid 549.186515 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 928.131377, chip thickness 300.000000 and glue 70.054250, giving hybrid 558.077127 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 926.952408, chip thickness 300.000000 and glue 73.945722, giving hybrid 553.006685 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 926.260248, chip thickness 300.000000 and glue 76.727472, giving hybrid 549.532776 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 929.681776, chip thickness 300.000000 and glue 67.622583, giving hybrid 562.059193 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 933.361895, chip thickness 300.000000 and glue 85.310000, giving hybrid 548.051895 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 931.195500, chip thickness 300.000000 and glue 79.657375, giving hybrid 551.538125 thickness
IService::UPLOADDB INFO Working on test code ASIC_METROLOGY
MetrologySvc::uploadDB INFO Doing DB upload...
MetrologySvc::writeOutput INFO Writing common output file /home/data/output//MetrologyHybrid_PROD_X_v2_interposer//DSG2608_X_030_C_H6/2//Data__DSG2608_X_030_C_H6.txt
MetrologySvc::writeOutput INFO Writing results output file /home/data/output//MetrologyHybrid_PROD_X_v2_interposer//DSG2608_X_030_C_H6/2//Results__DSG2608_X_030_C_H6.txt
MetrologySvc::writeOutput INFO Writing common output file /home/data/output//MetrologyHybrid_PROD_X_v2_interposer//DSG2608_X_030_C_H6/2//Data__DSG2608_X_030_C_H6.txt
MetrologySvc::writeOutput INFO Writing results output file /home/data/output//MetrologyHybrid_PROD_X_v2_interposer//DSG2608_X_030_C_H6/2//Results__DSG2608_X_030_C_H6.txt
IService::log INFO Logging status 0111 for component DSG2608_X_030_C_H6
IService::install INFO Installing output directory to /home/data/modules/DSG2608_X_030_C_H6/MetrologyHybrid_PROD_X_v2_interposer-2/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed Summary.pdf...
IService::install INFO Installed TotalStackUp.pdf...
IService::install INFO Installed HybridThickness.pdf...
IService::install INFO Installed Positions.pdf...
IService::install INFO Installed Tilt.pdf...
IService::install INFO Installed Data__DSG2608_X_030_C_H6.txt...
IService::install INFO Installed Results__DSG2608_X_030_C_H6.txt...
IService::install INFO Installed Results.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_ASIC_METROLOGY.json...
IService::install INFO Installed DSG2608_X_030_C_H6.root...
IService::install INFO Installed status.json...
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2_thick_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_Y_v0_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleLS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleSS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PROD_v2 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalModules_PPA_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name TCModules_PROD_v0 ignored through users request!
MetaData::getLocalName WARNING Could not find a local name for identifier 20USBHN0011973
The thickness of the glue \(t_{glue}\) is calculated as:
$$t_{glue} = \frac{1}{N_{c}}\sum_{c=1}^{N_{c}} z_{c} - \frac{1}{N_{b}}\sum_{b=1}^{N_{b}} z_{b} - t_{chip} $$
where \(t_{chip}\) is the thickness of the chip
\(z_{i}\) is the z-height measurement,
\(N_{i}\) is the number of measurements on a given surface,
and \(c\) and \(b\) run over measurements taken on the chip and base, respectively.
The assumed thickness of the chip is \(t_{chip} = 300\mu m\).
Uncertainties on the glue height measurement are estimated from the spread in z-height measurements on a given surface.
On a given surface, the height uncertainty \(\sigma_{i}\) is calculated as:
$$\sigma_{i} = \frac{\Delta z}{2\sqrt{N_{i}}}$$
where \(\Delta z = z_{max} - z_{min}\) and \(z_{max}\) and \(z_{min}\) are the maximum and minimum z-height measurements, respectively.
In addition, a conservative \(\sigma_{chip} = 10\mu m\) uncertainty on the chip thickeness is assumed.
The total uncertainty is calculated as:
$$\sigma_{glue} = \sqrt{ \sigma_{c}^2 + \sigma_{b}^2 + \sigma_{chip} }$$
The glue thickness measurements for each ASIC are shown in the figure and table below.
The thickness total stack up is measured from the top of the each chip to the jig,
and accounts for the combined thickness of hybrid flex, glue, and ABC/HCC chips in the case of hybrid.
The positions of the ASICs are measured on the 95x95 \(\mu m^2\) square pads on the opposite side of the sensor wire bonds.
These measured positions are compared against the technical drawns to calculated the relative ASIC position.
In some cases, the SmartScope incorrectly measures a different object than these square pads,
and using properties (such as the perimeter), the position is corrected.
The positions are shown in the figure below. If any corrections are applied, they are shown as transparent points.
The hybrid thickness is plotted below. It is calculated from the total stack up height minus the assembed chip thickness and measured glue thickness.
The tilt of a chip can be calculated in either the direction along the surface of a chip. We define
the x-direction to be any points whose difference is much larger along x, and similarly for y. The tilt in both cases is defined to be:
$$tilt = \frac{|\Delta z|}{\sqrt{\Delta x^{2} + \Delta y^{2}}} $$
Wirebonding for DSG2608_X_030_C_H6
Wirebonding summaries will be given below
WireBondSvc::run INFO Loading group FAILED_ASIC_BACKEND
WireBondSvc::run INFO Loading group FAILED_HYBRID_TO_PANEL
WireBondSvc::run INFO Loading group REPAIRED_ASIC_BACKEND
WireBondSvc::run INFO Loading group REPAIRED_HYBRID_TO_PANEL
IService::UPLOADDB INFO Working on test code WIRE_BONDING
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION
IService::log INFO Logging status 0111 for component DSG2608_X_030_C_H6
IService::install INFO Installing output directory to /home/data/modules/DSG2608_X_030_C_H6/HybridBonding_v1-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_WIRE_BONDING.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_VISUAL_INSPECTION.json...
IService::install INFO Installed DSG2608_X_030_C_H6.root...
IService::install INFO Installed status.json...
TopControl::monitor INFO Service with algoirthm name ModuleBonding_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPullTest ignored through users request!
TopControl::monitor INFO Service with algoirthm name PullTestCicorelCard ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridFlexArray_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name Powerboards_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ABC_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ABC_Wafer_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HCC_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorBondingQC_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HVTabSheet_SheerTest_Before_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HVTabSheet_SheerTest_After_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name PhotoUpload ignored through users request!
TopControl::monitor INFO Service with algoirthm name PictureModule ignored through users request!
TopControl::monitor INFO Service with algoirthm name GeneralPictures ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_PreTabIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_PostTabIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_Module_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_AMACIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SixWayJig_Y_slots ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPanelMetrology ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPanelMetrology_v7 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology_v8 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology_Y_v8 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_v10 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_v10-beta ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2_thick_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_Y_v0_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleLS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleSS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PROD_v2 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalModules_PPA_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name TCModules_PROD_v0 ignored through users request!
Metadata
Value
Date
2026-07-21T22:33:38.482+00:00
Operator
AD, AS
Bonder
hk1
Version
v1
Bond number
Type
Comment
Electrical results
Electrical summaries will be given below
ElectricalSvc::getListOfFilesFromDir INFO Scanning for test files DSG2608_X_030_C_H6/20USBHX2008035
ElectricalSvc::getListOfJsonFilesFromDir INFO Scanning for test files DSG2608_X_030_C_H6/20USBHX2008035
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008035_20260722_10_NO_BURNIN.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008035_20260722_10_powerCycleTest_BURNIN.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008035_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008035_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008035_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008035_20260722_10_3PG_BURNIN.json
ElectricalSvc::read INFO Found 0 results files...
ElectricalSvc::load_asic_db INFO Reading ASIC database file /home/data/upload//BurnInHybrids_PROD_v2//DSG2608_X_030_C_H6_GAIN_TEST.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
IService::UPLOADDB INFO Working on test code PEDESTAL_TRIM_BURNIN
IService::UPLOADDB INFO Working on test code STROBE_DELAY_BURNIN
IService::UPLOADDB INFO Working on test code RESPONSE_CURVE_BURNIN
IService::UPLOADDB INFO Working on test code NO_BURNIN
IService::log INFO Logging status 0111 for component DSG2608_X_030_C_H6
IService::install INFO Installing output directory to /home/data/modules/DSG2608_X_030_C_H6/BurnInHybrids_PROD_v2-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008035_20260722_10_PEDESTAL_TRIM_BURNIN.json...
IService::install INFO Installed DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008035_20260722_10_STROBE_DELAY_BURNIN.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008035_20260722_10_RESPONSE_CURVE_BURNIN.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008035_20260722_10_3PG_BURNIN.json...
IService::install INFO Installed DB_READY_NO_BURNIN_SN20USBHX2008035_20260722_10_NO_BURNIN.json...
IService::install INFO Installed DSG2608_X_030_C_H6.root...
IService::install INFO Installed status.json...
TopControl::monitor INFO Service with algoirthm name ElectricalModules_PPA_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name TCModules_PROD_v0 ignored through users request!
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008030_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008030_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008030_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008030_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008030_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008030_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008030_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008030_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008030_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008030_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008030_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008030_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008030_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008030_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008030_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008031_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008031_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008031_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008031_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008031_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008031_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008031_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008031_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008031_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008031_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008031_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008031_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008031_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008031_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008031_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008032_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008032_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008032_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008032_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008032_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008032_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008032_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008032_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008032_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008032_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008032_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008032_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008032_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008032_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008032_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008033_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008033_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008033_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008033_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008033_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008033_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008033_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008033_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008033_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008033_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008033_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008033_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008033_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008033_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008033_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008034_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008034_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008034_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008034_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008034_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008034_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008034_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008034_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008034_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008034_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008034_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008034_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008034_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008034_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008034_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008035_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008035_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008035_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008035_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008035_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008035_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008035_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008035_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008035_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008035_20260722_10_NO_BURNIN.json
ElectricalSvc::PassFail INFO Reading PassFail status directly from uploaded files
ElectricalSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_BURNIN_SN20USBHX2008035_20260722_10_PEDESTAL_TRIM_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_BURNIN_SN20USBHX2008035_20260722_10_STROBE_DELAY_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008035_20260722_10_RESPONSE_CURVE_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_BURNIN_SN20USBHX2008035_20260722_10_3PG_BURNIN.json
ElectricalSvc::PassFail INFO Loading json fle DB_READY_NO_BURNIN_SN20USBHX2008035_20260722_10_NO_BURNIN.json
ElectricalSvc::load_asic_db WARNING Could not find database ASIC GAIN_TEST results for DSG2608_X_030_C_H6
MetaData::getLocalName WARNING Could not find a local name for identifier 20USBHN0011973
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1362315
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1362314
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1362313
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1362312
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1362311
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1362310
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1362309
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1362307
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1362306
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1362305
Figures of gain and noise, and correlations with wafer/hybrid level test results, if they exist.
