Shown below are results for the glue weight measurements
IService::UPLOADDB INFO Working on test code ASIC_GLUE_WEIGHT
GlueWeightSvc::uploadDB INFO Formatting database test for ASIC_GLUE_WEIGHT
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION_RECEPTION
IService::log INFO Logging status 1111 for component GPC1938_X_001_A_H4
IService::install INFO Installing output directory to /home/data/modules/GPC1938_X_001_A_H4/ASICGlueWeight_v1-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed DB_COMMENTS.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_ASIC_GLUE_WEIGHT.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_VISUAL_INSPECTION_RECEPTION.json...
IService::install INFO Installed GPC1938_X_001_A_H4.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//ASICGlueWeight_v1//GPC1938_X_015_B_H1.config
IService::next INFO Scheduling GPC1938_X_015_B_H1.json file to run...
IService::next INFO Writing results to /home/data/output//ASICGlueWeight_v1//GPC1938_X_015_B_H1/1/
Metadata
Value
Component type
ASIC
Operator
Forest Martinez-McKinney
Date
2021-10-12T21:05:09.705+00:00
Program
ASIC_X.SRC
Tip size
23.000
Pressure
25.000
Dispense time
2.400
Field
Weight/Volume
Assummed density of glue
1.077
Extracted glue weight
0.042
Total volume of ASIC glue [uL]
39.283
Volume per glue dot [nL]
755.436
Weight of glue under ASICs [mg]
42.300
Weight per 5 glue dots [mg]
4.067
Weight per glue dot [mg]
0.813
Weights of ASICs [g]
0.394
Weights of ASICs plus HCC [g]
0.407
Weights of bare hybrid [g]
1.995
Weights of stuffed hybrid [g]
2.444
Metrology results
Shown below are the results of the module metrology scans
MetrologySvc::analyzeHybridThickness INFO Total stack up 777.226250, chip thickness 300.000000 and glue 88.876250, giving hybrid 388.350000 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 776.676250, chip thickness 300.000000 and glue 91.747500, giving hybrid 384.928750 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 778.664000, chip thickness 300.000000 and glue 88.573036, giving hybrid 390.090964 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 779.045250, chip thickness 300.000000 and glue 88.058607, giving hybrid 390.986643 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 779.977250, chip thickness 300.000000 and glue 89.314679, giving hybrid 390.662571 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 781.369500, chip thickness 300.000000 and glue 89.040679, giving hybrid 392.328821 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 779.793500, chip thickness 300.000000 and glue 89.212607, giving hybrid 390.580893 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 778.624250, chip thickness 300.000000 and glue 85.781714, giving hybrid 392.842536 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 776.092250, chip thickness 300.000000 and glue 90.299071, giving hybrid 385.793179 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 773.109750, chip thickness 300.000000 and glue 89.131821, giving hybrid 383.977929 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 775.088500, chip thickness 300.000000 and glue 90.781143, giving hybrid 384.307357 thickness
IService::UPLOADDB INFO Working on test code ASIC_METROLOGY
MetrologySvc::uploadDB INFO Doing DB upload...
MetrologySvc::writeOutput INFO Writing common output file /home/data/output//MetrologyHybrid_v10//GPC1938_X_001_A_H4/1//Data__GPC1938_X_001_A_H4.txt
MetrologySvc::writeOutput INFO Writing results output file /home/data/output//MetrologyHybrid_v10//GPC1938_X_001_A_H4/1//Results__GPC1938_X_001_A_H4.txt
MetrologySvc::writeOutput INFO Writing common output file /home/data/output//MetrologyHybrid_v10//GPC1938_X_001_A_H4/1//Data__GPC1938_X_001_A_H4.txt
MetrologySvc::writeOutput INFO Writing results output file /home/data/output//MetrologyHybrid_v10//GPC1938_X_001_A_H4/1//Results__GPC1938_X_001_A_H4.txt
IService::log INFO Logging status 1111 for component GPC1938_X_001_A_H4
IService::install INFO Installing output directory to /home/data/modules/GPC1938_X_001_A_H4/MetrologyHybrid_v10-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed Summary.pdf...
IService::install INFO Installed TotalStackUp.pdf...
IService::install INFO Installed HybridThickness.pdf...
IService::install INFO Installed Positions.pdf...
IService::install INFO Installed Tilt.pdf...
IService::install INFO Installed Data__GPC1938_X_001_A_H4.txt...
IService::install INFO Installed Results__GPC1938_X_001_A_H4.txt...
IService::install INFO Installed Results.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_ASIC_METROLOGY.json...
IService::install INFO Installed GPC1938_X_001_A_H4.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//MetrologyHybrid_v10//GPC1938_X_001_A_H5.config
IService::next INFO Scheduling GPC1938-X-001-A-H5.txt file to run...
IService::next INFO Writing results to /home/data/output//MetrologyHybrid_v10//GPC1938_X_001_A_H5/1/
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004330
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004331
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004332
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004333
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004335
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004336
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004337
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004338
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004340
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004341
Metadata
Value
Component type
X
Operator
Matthew Gignac
Date
2021-10-11T21:33:27.303+00:00
Program version
v10
Instrument
SmartScope Flash 250
The thickness of the glue \(t_{glue}\) is calculated as:
$$t_{glue} = \frac{1}{N_{c}}\sum_{c=1}^{N_{c}} z_{c} - \frac{1}{N_{b}}\sum_{b=1}^{N_{b}} z_{b} - t_{chip} $$
where \(t_{chip}\) is the thickness of the chip
\(z_{i}\) is the z-height measurement,
\(N_{i}\) is the number of measurements on a given surface,
and \(c\) and \(b\) run over measurements taken on the chip and base, respectively.
The assumed thickness of the chip is \(t_{chip} = 300\mu m\).
Uncertainties on the glue height measurement are estimated from the spread in z-height measurements on a given surface.
On a given surface, the height uncertainty \(\sigma_{i}\) is calculated as:
$$\sigma_{i} = \frac{\Delta z}{2\sqrt{N_{i}}}$$
where \(\Delta z = z_{max} - z_{min}\) and \(z_{max}\) and \(z_{min}\) are the maximum and minimum z-height measurements, respectively.
In addition, a conservative \(\sigma_{chip} = 10\mu m\) uncertainty on the chip thickeness is assumed.
The total uncertainty is calculated as:
$$\sigma_{glue} = \sqrt{ \sigma_{c}^2 + \sigma_{b}^2 + \sigma_{chip} }$$
The glue thickness measurements for each ASIC are shown in the figure and table below.
The thickness total stack up is measured from the top of the each chip to the jig,
and accounts for the combined thickness of hybrid flex, glue, and ABC/HCC chips in the case of hybrid.
The positions of the ASICs are measured on the 95x95 \(\mu m^2\) square pads on the opposite side of the sensor wire bonds.
These measured positions are compared against the technical drawns to calculated the relative ASIC position.
In some cases, the SmartScope incorrectly measures a different object than these square pads,
and using properties (such as the perimeter), the position is corrected.
The positions are shown in the figure below. If any corrections are applied, they are shown as transparent points.
The hybrid thickness is plotted below. It is calculated from the total stack up height minus the assembed chip thickness and measured glue thickness.
The tilt of a chip can be calculated in either the direction along the surface of a chip. We define
the x-direction to be any points whose difference is much larger along x, and similarly for y. The tilt in both cases is defined to be:
$$tilt = \frac{|\Delta z|}{\sqrt{\Delta x^{2} + \Delta y^{2}}} $$
Wirebonding for GPC1938_X_001_A_H4
Wirebonding summaries will be given below
WireBondSvc::run INFO Loading group FAILED_ASIC_BACKEND
WireBondSvc::run INFO Loading group FAILED_HYBRID_TO_PANEL
WireBondSvc::run INFO Loading group REPAIRED_ASIC_BACKEND
WireBondSvc::run INFO Loading group REPAIRED_HYBRID_TO_PANEL
IService::UPLOADDB INFO Working on test code WIRE_BONDING
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION
IService::log INFO Logging status 1111 for component GPC1938_X_001_A_H4
IService::install INFO Installing output directory to /home/data/modules/GPC1938_X_001_A_H4/HybridBonding_v1-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_WIRE_BONDING.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_VISUAL_INSPECTION.json...
IService::install INFO Installed GPC1938_X_001_A_H4.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//HybridBonding_v1//GPC1938_X_001_A_H5.config
IService::next INFO Scheduling HybridBonding_GPC1938_X_001_A_H5.json file to run...
IService::next INFO Writing results to /home/data/output//HybridBonding_v1//GPC1938_X_001_A_H5/1/
Metadata
Value
Date
2021-11-10T22:29:46.839+00:00
Operator
Kirsten Affolder
Bonder
hk2
Version
v1
Bond number
Type
Comment
Electrical results
Electrical summaries will be given below
ElectricalSvc::getListOfFilesFromDir INFO Scanning for test files GPC1938_X_001_A_H4/20USBHX2000770
ElectricalSvc::getListOfFilesFromDir INFO Found file GPC1938_X_001_A_H4_RC_7_7.txt
ElectricalSvc::getListOfFilesFromDir INFO Found file GPC1938_X_001_A_H4_RC_7_4.txt
ElectricalSvc::getListOfFilesFromDir INFO Found file GPC1938_X_001_A_H4_20220224.txt
ElectricalSvc::getListOfJsonFilesFromDir INFO Scanning for test files GPC1938_X_001_A_H4/20USBHX2000770
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle GPC1938_X_001_A_H4_20220224_7_7.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle GPC1938_X_001_A_H4_20220224_7_4.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle GPC1938_X_001_A_H4_20220224_7_3.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle GPC1938_X_001_A_H4_20220224_7_2.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle GPC1938_X_001_A_H4_20220224_7_17.json
ElectricalSvc::read INFO Found 2 results files...
ElectricalSvc::read INFO Analyzing test ResponseCurve for component GPC1938_X_001_A_H4
ElectricalSvc::read INFO Detected 0 dead channels
ElectricalSvc::read INFO Detected 0 stuck channels
ElectricalSvc::read INFO Detected 0 low gain channels
ElectricalSvc::read INFO Detected 0 high gain channels
ElectricalSvc::read INFO Detected 0 low offset channels
ElectricalSvc::read INFO Detected 0 high offset channels
ElectricalSvc::read INFO Detected 2560 unbonded channels
ElectricalSvc::read INFO Detected 0 part bonded channels
ElectricalSvc::read INFO Detected 0 high noise channels
ElectricalSvc::read INFO Detected 0 inefficient channels
ElectricalSvc::load_asic_db INFO Reading ASIC database file /home/data/upload//ElectricalHybrid//GPC1938_X_001_A_H4_GAIN_TEST.json
IService::UPLOADDB INFO Working on test code PEDESTAL_TRIM_PPA
IService::UPLOADDB INFO Working on test code STROBE_DELAY_PPA
IService::UPLOADDB INFO Working on test code RESPONSE_CURVE_PPA
IService::log INFO Logging status 1111 for component GPC1938_X_001_A_H4
IService::install INFO Installing output directory to /home/data/modules/GPC1938_X_001_A_H4/ElectricalHybrids-1/
IService::install INFO File already installed: warningLog.txt...
IService::install INFO File already installed: errorLog.txt...
IService::install INFO File already installed: infoLog.txt...
IService::install INFO File already installed: Gain_Channel1D.pdf...
IService::install INFO File already installed: DB_READY_PEDESTAL_TRIM_PPA_GPC1938_X_001_A_H4_20220224_7_2.json...
IService::install INFO File already installed: DB_READY_STROBE_DELAY_PPA_GPC1938_X_001_A_H4_20220224_7_3.json...
IService::install INFO File already installed: DB_READY_RESPONSE_CURVE_PPA_GPC1938_X_001_A_H4_20220224_7_7.json...
IService::install INFO File already installed: DB_READY_RESPONSE_CURVE_PPA_GPC1938_X_001_A_H4_20220224_7_4.json...
IService::install INFO File already installed: GPC1938_X_001_A_H4.root...
IService::install INFO File already installed: status.json...
MetaData::readField INFO Reading file /home/data/upload//ElectricalHybrid//GPC1938_X_018_A_H2.config
IService::next INFO Scheduling Panel-31-BondIDed file to run...
IService::next INFO Writing results to /home/data/output//ElectricalHybrids//GPC1938_X_018_A_H2/1/
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004330
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004331
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004332
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004333
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004335
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004336
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004337
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004338
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004340
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1004341
Defect
Number of channels (%)
Dead
0
Stuck
0
Low gain
0
High gain
0
Low offset
0
High offset
0
Unbonded
2560
Part bonded
0
High noise
0
Inefficient
0
Figures of gain and noise, and correlations with wafer/hybrid level test results, if they exist.