Shown below are results for the glue weight measurements
IService::UPLOADDB INFO Working on test code ASIC_GLUE_WEIGHT
GlueWeightSvc::uploadDB INFO Formatting database test for ASIC_GLUE_WEIGHT
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION_RECEPTION
IService::log INFO Logging status 1111 for component GPC1938_X_015_B_H4
IService::install INFO Installing output directory to /home/data/modules/GPC1938_X_015_B_H4/ASICGlueWeight_v1-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed DB_COMMENTS.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_ASIC_GLUE_WEIGHT.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_VISUAL_INSPECTION_RECEPTION.json...
IService::install INFO Installed GPC1938_X_015_B_H4.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//ASICGlueWeight_v1//GPC1940_Y_009_B_H4.config
IService::next INFO Scheduling GPC1940_Y_009_B_H4.json file to run...
IService::next INFO Writing results to /home/data/output//ASICGlueWeight_v1//GPC1940_Y_009_B_H4/1/
Metadata
Value
Component type
ASIC
Operator
Forest Martinez
Date
2021-10-08T20:52:22.789+00:00
Program
ASIC_X
Tip size
23.000
Pressure
25.000
Dispense time
2.460
Field
Weight/Volume
Assummed density of glue
1.077
Extracted glue weight
0.046
Total volume of ASIC glue [uL]
42.533
Volume per glue dot [nL]
817.942
Weight of glue under ASICs [mg]
45.800
Weight per 5 glue dots [mg]
4.404
Weight per glue dot [mg]
0.881
Weights of ASICs [g]
0.399
Weights of ASICs plus HCC [g]
0.413
Weights of bare hybrid [g]
2.113
Weights of stuffed hybrid [g]
2.572
Metrology results
Shown below are the results of the module metrology scans
MetrologySvc::analyzeHybridThickness INFO Total stack up 779.984750, chip thickness 300.000000 and glue 88.684375, giving hybrid 391.300375 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 781.113000, chip thickness 300.000000 and glue 84.383000, giving hybrid 396.730000 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 780.919750, chip thickness 300.000000 and glue 81.428583, giving hybrid 399.491167 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 779.547500, chip thickness 300.000000 and glue 76.643667, giving hybrid 402.903833 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 779.731750, chip thickness 300.000000 and glue 76.827833, giving hybrid 402.903917 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 779.776750, chip thickness 300.000000 and glue 80.029750, giving hybrid 399.747000 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 777.639500, chip thickness 300.000000 and glue 78.925250, giving hybrid 398.714250 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 774.967000, chip thickness 300.000000 and glue 76.431083, giving hybrid 398.535917 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 773.334250, chip thickness 300.000000 and glue 78.865167, giving hybrid 394.469083 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 768.946750, chip thickness 300.000000 and glue 77.453857, giving hybrid 391.492893 thickness
MetrologySvc::analyzeHybridThickness INFO Total stack up 768.190250, chip thickness 300.000000 and glue 77.588464, giving hybrid 390.601786 thickness
IService::UPLOADDB INFO Working on test code ASIC_METROLOGY
MetrologySvc::uploadDB INFO Doing DB upload...
MetrologySvc::writeOutput INFO Writing common output file /home/data/output//MetrologyHybrid_v10-beta//GPC1938_X_015_B_H4/1//Data__GPC1938_X_015_B_H4.txt
MetrologySvc::writeOutput INFO Writing results output file /home/data/output//MetrologyHybrid_v10-beta//GPC1938_X_015_B_H4/1//Results__GPC1938_X_015_B_H4.txt
MetrologySvc::writeOutput INFO Writing common output file /home/data/output//MetrologyHybrid_v10-beta//GPC1938_X_015_B_H4/1//Data__GPC1938_X_015_B_H4.txt
MetrologySvc::writeOutput INFO Writing results output file /home/data/output//MetrologyHybrid_v10-beta//GPC1938_X_015_B_H4/1//Results__GPC1938_X_015_B_H4.txt
IService::log INFO Logging status 1111 for component GPC1938_X_015_B_H4
IService::install INFO Installing output directory to /home/data/modules/GPC1938_X_015_B_H4/MetrologyHybrid_v10-beta-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed Summary.pdf...
IService::install INFO Installed TotalStackUp.pdf...
IService::install INFO Installed HybridThickness.pdf...
IService::install INFO Installed Positions.pdf...
IService::install INFO Installed Tilt.pdf...
IService::install INFO Installed Data__GPC1938_X_015_B_H4.txt...
IService::install INFO Installed Results__GPC1938_X_015_B_H4.txt...
IService::install INFO Installed Results.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_ASIC_METROLOGY.json...
IService::install INFO Installed GPC1938_X_015_B_H4.root...
IService::install INFO Installed status.json...
TopControl::monitor INFO Serivce MetrologyHybrid_PPB_X_v0 has 100 files to process! Proceeding...
MetaData::readField INFO Reading file /home/data/upload//MetrologyHybrid_PPB_X_v0//GPC2150_X_003_C_H0.config
IService::next INFO Scheduling GPC2150-X-003-C.txt file to run...
IService::next INFO Writing results to /home/data/output//MetrologyHybrid_PPB_X_v0//GPC2150_X_003_C_H0/1/
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAH0013069
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012112
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012123
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012122
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012115
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012116
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012117
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012118
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012119
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012120
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012121
Metadata
Value
Component type
X
Operator
Matthew Gignac
Date
2021-10-08T17:14:09.388+00:00
Program version
v10
Instrument
SmartScope Flash 250
The thickness of the glue \(t_{glue}\) is calculated as:
$$t_{glue} = \frac{1}{N_{c}}\sum_{c=1}^{N_{c}} z_{c} - \frac{1}{N_{b}}\sum_{b=1}^{N_{b}} z_{b} - t_{chip} $$
where \(t_{chip}\) is the thickness of the chip
\(z_{i}\) is the z-height measurement,
\(N_{i}\) is the number of measurements on a given surface,
and \(c\) and \(b\) run over measurements taken on the chip and base, respectively.
The assumed thickness of the chip is \(t_{chip} = 300\mu m\).
Uncertainties on the glue height measurement are estimated from the spread in z-height measurements on a given surface.
On a given surface, the height uncertainty \(\sigma_{i}\) is calculated as:
$$\sigma_{i} = \frac{\Delta z}{2\sqrt{N_{i}}}$$
where \(\Delta z = z_{max} - z_{min}\) and \(z_{max}\) and \(z_{min}\) are the maximum and minimum z-height measurements, respectively.
In addition, a conservative \(\sigma_{chip} = 10\mu m\) uncertainty on the chip thickeness is assumed.
The total uncertainty is calculated as:
$$\sigma_{glue} = \sqrt{ \sigma_{c}^2 + \sigma_{b}^2 + \sigma_{chip} }$$
The glue thickness measurements for each ASIC are shown in the figure and table below.
The thickness total stack up is measured from the top of the each chip to the jig,
and accounts for the combined thickness of hybrid flex, glue, and ABC/HCC chips in the case of hybrid.
The positions of the ASICs are measured on the 95x95 \(\mu m^2\) square pads on the opposite side of the sensor wire bonds.
These measured positions are compared against the technical drawns to calculated the relative ASIC position.
In some cases, the SmartScope incorrectly measures a different object than these square pads,
and using properties (such as the perimeter), the position is corrected.
The positions are shown in the figure below. If any corrections are applied, they are shown as transparent points.
The hybrid thickness is plotted below. It is calculated from the total stack up height minus the assembed chip thickness and measured glue thickness.
The tilt of a chip can be calculated in either the direction along the surface of a chip. We define
the x-direction to be any points whose difference is much larger along x, and similarly for y. The tilt in both cases is defined to be:
$$tilt = \frac{|\Delta z|}{\sqrt{\Delta x^{2} + \Delta y^{2}}} $$
Wirebonding for GPC1938_X_015_B_H4
Wirebonding summaries will be given below
WireBondSvc::run INFO Loading group FAILED_ASIC_BACKEND
WireBondSvc::run INFO Loading group FAILED_HYBRID_TO_PANEL
WireBondSvc::run INFO Loading group REPAIRED_ASIC_BACKEND
WireBondSvc::run INFO Loading group REPAIRED_HYBRID_TO_PANEL
IService::UPLOADDB INFO Working on test code WIRE_BONDING
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION
IService::log INFO Logging status 1111 for component GPC1938_X_015_B_H4
IService::install INFO Installing output directory to /home/data/modules/GPC1938_X_015_B_H4/HybridBonding_v1-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_WIRE_BONDING.json...
IService::install INFO Installed DB_READY_HYBRID_ASSEMBLY_VISUAL_INSPECTION.json...
IService::install INFO Installed GPC1938_X_015_B_H4.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//HybridBonding_v1//GPC1938_X_015_B_H5.config
IService::next INFO Scheduling HybridBonding_GPC1938_X_015_B_H5.json file to run...
IService::next INFO Writing results to /home/data/output//HybridBonding_v1//GPC1938_X_015_B_H5/1/
Metadata
Value
Date
2021-11-10T23:18:21.839+00:00
Operator
Kirsten Affolder
Bonder
hk2
Version
v1
Bond number
Type
Comment
Electrical results
Electrical summaries will be given below
ElectricalSvc::getListOfFilesFromDir INFO Scanning for test files GPC1938_X_015_B_H4/20USBHX2000763
ElectricalSvc::getListOfFilesFromDir INFO Found file GPC1938_X_015_B_H4_RC_7_7.txt
ElectricalSvc::getListOfFilesFromDir INFO Found file GPC1938_X_015_B_H4_RC_7_4.txt
ElectricalSvc::getListOfFilesFromDir INFO Found file GPC1938_X_015_B_H4_20220224.txt
ElectricalSvc::getListOfJsonFilesFromDir INFO Scanning for test files GPC1938_X_015_B_H4/20USBHX2000763
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle GPC1938_X_015_B_H4_20220224_7_17.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle GPC1938_X_015_B_H4_20220224_7_7.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle GPC1938_X_015_B_H4_20220224_7_4.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle GPC1938_X_015_B_H4_20220224_7_3.json
ElectricalSvc::getListOfJsonFilesFromDir INFO Loading json fle GPC1938_X_015_B_H4_20220224_7_2.json
ElectricalSvc::read INFO Found 2 results files...
ElectricalSvc::read INFO Analyzing test ResponseCurve for component GPC1938_X_015_B_H4
ElectricalSvc::read INFO Detected 0 dead channels
ElectricalSvc::read INFO Detected 0 stuck channels
ElectricalSvc::read INFO Detected 0 low gain channels
ElectricalSvc::read INFO Detected 0 high gain channels
ElectricalSvc::read INFO Detected 0 low offset channels
ElectricalSvc::read INFO Detected 0 high offset channels
ElectricalSvc::read INFO Detected 2559 unbonded channels
ElectricalSvc::read INFO Detected 0 part bonded channels
ElectricalSvc::read INFO Detected 0 high noise channels
ElectricalSvc::read INFO Detected 0 inefficient channels
ElectricalSvc::load_asic_db INFO Reading ASIC database file /home/data/upload//ElectricalHybrid//GPC1938_X_015_B_H4_GAIN_TEST.json
IService::UPLOADDB INFO Working on test code PEDESTAL_TRIM_PPA
IService::UPLOADDB INFO Working on test code STROBE_DELAY_PPA
IService::UPLOADDB INFO Working on test code RESPONSE_CURVE_PPA
IService::log INFO Logging status 1111 for component GPC1938_X_015_B_H4
IService::install INFO Installing output directory to /home/data/modules/GPC1938_X_015_B_H4/ElectricalHybrids-1/
IService::install INFO File already installed: warningLog.txt...
IService::install INFO File already installed: errorLog.txt...
IService::install INFO File already installed: infoLog.txt...
IService::install INFO File already installed: Gain_Channel1D.pdf...
IService::install INFO File already installed: DB_READY_PEDESTAL_TRIM_PPA_GPC1938_X_015_B_H4_20220224_7_2.json...
IService::install INFO File already installed: DB_READY_STROBE_DELAY_PPA_GPC1938_X_015_B_H4_20220224_7_3.json...
IService::install INFO File already installed: DB_READY_RESPONSE_CURVE_PPA_GPC1938_X_015_B_H4_20220224_7_7.json...
IService::install INFO File already installed: DB_READY_RESPONSE_CURVE_PPA_GPC1938_X_015_B_H4_20220224_7_4.json...
IService::install INFO File already installed: GPC1938_X_015_B_H4.root...
IService::install INFO File already installed: status.json...
MetaData::readField INFO Reading file /home/data/upload//ElectricalHybrid//GPC1938_X_001_A_H6.config
IService::next INFO Scheduling Panel-27-BondIDed file to run...
IService::next INFO Writing results to /home/data/output//ElectricalHybrids//GPC1938_X_001_A_H6/1/
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAH0013069
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012112
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012123
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012122
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012115
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012116
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012117
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012118
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012119
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012120
MetaData::getLocalName WARNING Could not find a local name for identifier 20USGAA1012121
Defect
Number of channels (%)
Dead
0
Stuck
0
Low gain
0
High gain
0
Low offset
0
High offset
0
Unbonded
2559
Part bonded
0
High noise
0
Inefficient
0
Figures of gain and noise, and correlations with wafer/hybrid level test results, if they exist.