Results for SCIPP-PRO_LS-0749
The information on this page was generated on Sat Aug 29 03:30:45 2026 (America/Los_Angeles).
post gluing
after wirebonding long black streak down channel (middle left of sensor) - found preTab - LM, AS, 25.06.2026--18-48-29
Brief description of DB components associated to this Module and associated tests Shown below are results for the HVTab IV
The current measurements are calibrated to a common temperature using the following relationship:
$$I_{temp}^{SF} = \left ( \frac{T_{ref}}{T_{meas}} \right )^{2} \times e^{eE_{g}^{Si} \frac{T_{ref}-T_{meas}}{2 k_{B} T_{ref} T_{meas} }} $$
where \( T_{ref} \) is the reference temperature,
\( T_{meas} \) is the temperatured measured during the test,
\( e \) is the electric charge,
\( E_{g}^{Si} \) is the band gap energy of silicon, and
\( k_{B} \) is the Boltzman constant
Shown below are results for the glue weight measurements Shown below are the results of the module metrology scans The glue thicknesses are shown below. The positions are defined as the hybrid cross fiducials and the circles on the powerboard Height of components on the powerboard Wirebonding summaries will be given below Thermal cycling summaries will be given below
Test Summary Response Curve Defect Summary Comments Figures of gain and noise, and correlations with wafer/hybrid level test results, if they exist. Thermal cycling summaries will be given below
Test Summary Response Curve Defect Summary Comments Figures of gain and noise, and correlations with wafer/hybrid level test results, if they exist. Thermal cycling summaries will be given below
Test Summary Response Curve Defect Summary Comments Figures of gain and noise, and correlations with wafer/hybrid level test results, if they exist. Thermal cycling summaries will be given below
Test Summary Response Curve Defect Summary Comments Figures of gain and noise, and correlations with wafer/hybrid level test results, if they exist.
You may click the button below to manually regenerate the content.
Photos of GeneralPicture_Module_2026-07-24_22-38-05
Photos of GeneralPicture_Module_2026-07-28_21-00-57
Comments for SCIPP-PRO_LS-0749
LIMBO-the IV has very low values until >40 V on some runs. Not clear the cause or if it matters. - SCIPP Stripper, 14.08.2026--16-48-37 Basic Information for SCIPP-PRO_LS-0749
Click for packaging sticker
Metadata Value
Alt Identifier UCSC-BARREL_LS_MODULE-0942 Serial Number 20USBML1239624 Batch PRODUCTION_UCSC Assembled False Completed False Current Location SCIPP, UC Santa Cruz Manufacture ID SCIPP-PRO_LS-0749 User SCIPP Module Institute Account
Children
Alt Identifier Local Name Serial Number Type Trashed Completed Timestamp
20USBP05030037 B3 False True 2026-07-24T23:54:30.474Z
UCSC-X-1180 DSG2608_X_014_A_H5 20USBHX2008023 X False False 2026-07-24T23:54:26.130Z
VPA39573-W02786 20USBSL0002786 ATLAS18LS False True 2026-06-25T18:48:33.558Z
Parents
Component Type Timestamp
Module Frame
Name Current Stage Timestamp
Test Name Passed? Date
Module IV with PS V1 2026-06-25T22:58:47.303Z
Visual Inspection 2026-07-28T21:13:28.878Z
Module glue weights 2026-07-24T23:52:16.297Z
Module Metrology 2026-07-24T16:24:42.378Z
Module Wire Bonding 2026-07-28T21:13:28.878Z
HVTab IV for SCIPP-PRO_LS-0749
SensorIVSvc::read INFO Using measurement with voltage 700.460000 and current 0.274810 for current stability calculation
SensorIVSvc::read INFO Using measurement with voltage 700.460000 and current 0.274810 for current stability calculation
SensorIVSvc::read INFO Using measurement with voltage 700.480000 and current 0.274810 for current stability calculation
SensorIVSvc::read INFO Using measurement with voltage 700.480000 and current 0.274810 for current stability calculation
SensorIVSvc::CalculateVBD INFO Average voltage 5.040000, current 0.015205, dIdV 0.002330
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.772431 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 15.020000, current 0.031765, dIdV 0.000991
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.468592 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 25.030001, current 0.039575, dIdV 0.000570
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.360420 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 35.070000, current 0.044185, dIdV 0.000349
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.276930 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 45.079998, current 0.046950, dIdV 0.000203
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.194733 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 55.070000, current 0.049065, dIdV 0.000221
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.247553 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 65.090004, current 0.051425, dIdV 0.000250
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.317063 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 75.089996, current 0.052485, dIdV -0.000039
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.055909 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 85.110001, current 0.053445, dIdV 0.000230
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.365668 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 95.120003, current 0.053705, dIdV -0.000180
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.318310 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 105.099998, current 0.053720, dIdV 0.000182
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.356072 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 115.120003, current 0.054735, dIdV 0.000021
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.043992 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 125.129997, current 0.055345, dIdV 0.000101
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.228809 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 135.130005, current 0.055205, dIdV -0.000129
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.315134 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 145.130005, current 0.055015, dIdV 0.000091
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.240540 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 155.149994, current 0.055875, dIdV 0.000081
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.223574 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 165.169998, current 0.056435, dIdV 0.000031
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.090910 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 175.169998, current 0.057300, dIdV 0.000142
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.433237 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 185.209991, current 0.058160, dIdV 0.000030
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.094965 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 195.229996, current 0.059270, dIdV 0.000192
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.633698 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 205.240005, current 0.061385, dIdV 0.000230
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.769269 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 215.250000, current 0.062945, dIdV 0.000081
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.277547 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 225.270004, current 0.064205, dIdV 0.000170
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.596393 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 235.290009, current 0.065065, dIdV 0.000001
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.003623 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 245.289993, current 0.064875, dIdV -0.000039
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.147163 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 255.309998, current 0.067085, dIdV 0.000480
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.826921 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 265.309998, current 0.068400, dIdV -0.000218
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.847273 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 275.309998, current 0.067615, dIdV 0.000061
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.247880 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 285.330017, current 0.067275, dIdV -0.000129
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.546029 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 295.339996, current 0.066335, dIdV -0.000059
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.262683 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 305.359985, current 0.066695, dIdV 0.000130
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.597388 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 315.380005, current 0.069605, dIdV 0.000451
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.043479 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 325.410004, current 0.071665, dIdV -0.000039
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.176031 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 335.269989, current 0.073485, dIdV 0.000417
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.903373 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 345.089996, current 0.076510, dIdV 0.000202
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.912925 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 355.100006, current 0.079270, dIdV 0.000349
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.561623 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 365.109985, current 0.083580, dIdV 0.000513
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.241098 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 375.130005, current 0.086995, dIdV 0.000170
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.732969 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 385.140015, current 0.089455, dIdV 0.000322
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.387585 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 395.149994, current 0.093065, dIdV 0.000399
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.692474 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 405.160004, current 0.096825, dIdV 0.000352
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.474643 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 415.160004, current 0.100285, dIdV 0.000340
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.406048 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 425.169983, current 0.104950, dIdV 0.000593
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.403097 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 435.170013, current 0.109615, dIdV 0.000340
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.351063 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 445.149994, current 0.114325, dIdV 0.000605
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.354254 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 455.160004, current 0.118885, dIdV 0.000309
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.181237 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 465.209991, current 0.122945, dIdV 0.000500
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.891944 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 475.209991, current 0.128455, dIdV 0.000602
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.227812 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 485.209991, current 0.134620, dIdV 0.000631
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.273367 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 495.230011, current 0.140735, dIdV 0.000590
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.075509 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 505.239990, current 0.147395, dIdV 0.000741
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.539997 and VBD limit 5.552400
SensorIVSvc::CalculateVBD INFO Average voltage 515.229980, current 0.153955, dIdV 0.000572
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.914754 and VBD limit 5.652300
SensorIVSvc::CalculateVBD INFO Average voltage 525.269958, current 0.158765, dIdV 0.000387
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.280805 and VBD limit 5.752700
SensorIVSvc::CalculateVBD INFO Average voltage 535.299988, current 0.164975, dIdV 0.000854
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.772358 and VBD limit 5.853000
SensorIVSvc::CalculateVBD INFO Average voltage 545.299988, current 0.169835, dIdV 0.000121
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.386955 and VBD limit 5.953000
SensorIVSvc::CalculateVBD INFO Average voltage 555.289978, current 0.175600, dIdV 0.001038
SensorIVSvc::CalculateVBD INFO V_avg_BD 3.283134 and VBD limit 6.052900
SensorIVSvc::CalculateVBD INFO Average voltage 565.289978, current 0.183215, dIdV 0.000488
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.505892 and VBD limit 6.152900
SensorIVSvc::CalculateVBD INFO Average voltage 575.309998, current 0.188975, dIdV 0.000662
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.016362 and VBD limit 6.253100
SensorIVSvc::CalculateVBD INFO Average voltage 585.309998, current 0.195435, dIdV 0.000630
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.886015 and VBD limit 6.353100
SensorIVSvc::CalculateVBD INFO Average voltage 595.320007, current 0.201695, dIdV 0.000621
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.832934 and VBD limit 6.453200
SensorIVSvc::CalculateVBD INFO Average voltage 605.349976, current 0.207605, dIdV 0.000558
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.626049 and VBD limit 6.553500
SensorIVSvc::CalculateVBD INFO Average voltage 615.369995, current 0.213065, dIdV 0.000532
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.536697 and VBD limit 6.653700
SensorIVSvc::CalculateVBD INFO Average voltage 625.390015, current 0.218875, dIdV 0.000627
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.792199 and VBD limit 6.753900
SensorIVSvc::CalculateVBD INFO Average voltage 635.399963, current 0.224940, dIdV 0.000584
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.650609 and VBD limit 6.854000
SensorIVSvc::CalculateVBD INFO Average voltage 645.390015, current 0.229705, dIdV 0.000370
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.040298 and VBD limit 6.953900
SensorIVSvc::CalculateVBD INFO Average voltage 655.410034, current 0.237465, dIdV 0.001179
SensorIVSvc::CalculateVBD INFO V_avg_BD 3.253087 and VBD limit 7.054100
SensorIVSvc::CalculateVBD INFO Average voltage 665.419983, current 0.248425, dIdV 0.001011
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.708019 and VBD limit 7.154200
SensorIVSvc::CalculateVBD INFO Average voltage 675.429993, current 0.256835, dIdV 0.000670
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.761088 and VBD limit 7.254300
SensorIVSvc::CalculateVBD INFO Average voltage 685.450012, current 0.264545, dIdV 0.000869
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.252302 and VBD limit 7.354500
SensorIVSvc::CalculateVBD INFO Average voltage 695.460022, current 0.271855, dIdV 0.000591
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.511897 and VBD limit 7.454600
SensorIVSvc::CalculateVBD INFO Calculated VBD to be 690.460022
SensorIVSvc::read INFO Mean voltage for current stability 0.274810 calculated with 4 points
SensorIVSvc::read INFO RMS current stability 0.000000
IService::UPLOADDB INFO Working on test code MODULE_IV_PS_V1
SensorIVSvc::uploadDB INFO Formatting database upload for MODULE_IV_PS_V1 and run number 1
SensorIVSvc::writeOutput INFO Writing results output file /home/data/output//SensorIV_PostTabIV_PPB_v1//SCIPP-PRO_LS-0749/1//20USBML1239624-HV_TAB_ATTACHED_IV_001.dat
SensorIVSvc::getDate INFO Parsing date 2026-06-25T22:58:47.303+00:00...
SensorIVSvc::getDate INFO Year 2026
SensorIVSvc::getDate INFO Month 6
SensorIVSvc::getDate INFO Day 25
SensorIVSvc::getDate INFO Hour 22
SensorIVSvc::getDate INFO Minute 58
SensorIVSvc::getDate INFO Second 47
SensorIVSvc::getDate INFO Offset 0:0
SensorIVSvc::getDate INFO Converted month into string Jun
SensorIVSvc::getDate INFO FINALLY obtained 25 Jun 2026
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION
SensorIVSvc::uploadDB INFO Formatting database upload for VISUAL_INSPECTION and run number 1
IService::log INFO Logging status 0111 for component SCIPP-PRO_LS-0749
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PRO_LS-0749/SensorIV_PostTabIV_PPB_v1-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed IVCurve.pdf...
IService::install INFO Installed 20USBML1239624-HV_TAB_ATTACHED_IV_001.dat...
IService::install INFO Installed DB_READY_MODULE_MODULE_IV_PS_V1.json...
IService::install INFO Installed DB_READY_MODULE_VISUAL_INSPECTION.json...
IService::install INFO Installed SCIPP-PRO_LS-0749.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//SensorIV_PostTabIV_PPB_v1//SCIPP-PRO_LS-0748-1.config
IService::next INFO Scheduling Data_SCIPP-PRO_LS-0748-1.txt file to run...
IService::next INFO Writing results to /home/data/output//SensorIV_PostTabIV_PPB_v1//SCIPP-PRO_LS-0748/1/
Metadata Value
Component type ATLAS18LS
Operator LM
Date 2026-06-25T22:58:47.303+00:00
Institute UCSC
Power supply CAEN_DT1415ET
Temperarture [C] 20.4
Humidity 2.3
Current per area @500V 1.449
Breakdown voltage 690.460
Current stability (RMS@700V) 0.000
Glue weight for SCIPP-PRO_LS-0749
IService::UPLOADDB INFO Working on test code GLUE_WEIGHT
GlueWeightSvc::uploadDB INFO Formatting database test for GLUE_WEIGHT
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION
IService::log INFO Logging status 0111 for component SCIPP-PRO_LS-0749
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PRO_LS-0749/GlueWeightModule_LS_PPA-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed DB_COMMENTS.json...
IService::install INFO Installed DB_READY_MODULE_GLUE_WEIGHT.json...
IService::install INFO Installed DB_READY_MODULE_VISUAL_INSPECTION.json...
IService::install INFO Installed SCIPP-PRO_LS-0749.root...
IService::install INFO Installed status.json...
TopControl::monitor INFO Service with algoirthm name GlueWeightModule_SS_PPA ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridBonding_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleBonding_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPullTest ignored through users request!
TopControl::monitor INFO Service with algoirthm name PullTestCicorelCard ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridFlexArray_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name Powerboards_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ABC_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ABC_Wafer_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HCC_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorBondingQC_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HVTabSheet_SheerTest_Before_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HVTabSheet_SheerTest_After_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name PhotoUpload ignored through users request!
TopControl::monitor INFO Service with algoirthm name PictureModule ignored through users request!
TopControl::monitor INFO Service with algoirthm name GeneralPictures ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_PreTabIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_PostTabIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_Module_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_AMACIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SixWayJig_Y_slots ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPanelMetrology ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPanelMetrology_v7 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology_v8 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology_Y_v8 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_v10 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_v10-beta ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2_thick_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_Y_v0_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleLS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleSS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PROD_v2 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalModules_PPA_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name TCModules_PROD_v0 ignored through users request!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=132.157575 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=156.961242 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=157.898742 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=159.703908 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=166.778075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=167.520242 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=160.611908 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=161.284408 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=161.570575 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=125.779408 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 155.026608 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=94.440075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=103.937075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=85.606075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.718075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 86.425325 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5799.371375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5799.371375 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=132.157575 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=156.961242 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=157.898742 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=159.703908 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=166.778075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=167.520242 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=160.611908 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=161.284408 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=161.570575 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=125.779408 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 155.026608 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=94.440075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=103.937075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=85.606075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.718075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 86.425325 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5799.371375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5799.371375 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=132.157575 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=156.961242 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=157.898742 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=159.703908 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=166.778075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=167.520242 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=160.611908 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=161.284408 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=161.570575 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=125.779408 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 155.026608 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=94.440075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=103.937075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=85.606075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.718075 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 86.425325 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5799.371375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5799.371375 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=141.157146 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=152.093479 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=154.153479 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=159.716146 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=158.450312 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=159.719313 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=161.456646 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=160.062479 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=161.139979 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=136.836312 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 154.478529 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=27.620113 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=125.918312 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.520813 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=65.785062 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 77.211075 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5802.058975 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5802.058975 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=141.157146 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=152.093479 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=154.153479 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=159.716146 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=158.450312 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=159.719313 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=161.456646 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=160.062479 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=161.139979 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=136.836312 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 154.478529 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=27.620113 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=125.918312 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.520813 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=65.785062 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 77.211075 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5802.058975 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5802.058975 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=141.157146 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=152.093479 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=154.153479 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=159.716146 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=158.450312 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=159.719313 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=161.456646 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=160.062479 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=161.139979 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=136.836312 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 154.478529 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=27.620113 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=125.918312 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.520813 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=65.785062 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 77.211075 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5802.058975 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5802.058975 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=124.267050 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=139.869550 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=141.316717 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=150.614217 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=150.582383 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=147.326217 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=151.224217 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=145.922883 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=141.906383 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=114.294883 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 140.732450 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=67.568250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=114.144050 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=80.703050 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=57.519300 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 79.983663 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5826.013450 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5826.013450 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=124.267050 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=139.869550 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=141.316717 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=150.614217 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=150.582383 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=147.326217 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=151.224217 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=145.922883 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=141.906383 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=114.294883 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 140.732450 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=67.568250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=114.144050 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=80.703050 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=57.519300 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 79.983663 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5826.013450 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5826.013450 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=124.267050 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=139.869550 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=141.316717 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=150.614217 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=150.582383 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=147.326217 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=151.224217 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=145.922883 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=141.906383 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=114.294883 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 140.732450 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=67.568250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=114.144050 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=80.703050 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=57.519300 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 79.983663 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5826.013450 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5826.013450 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=122.422712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=148.549879 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=145.220712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=149.371546 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=153.106379 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=148.555379 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=149.314712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=150.874046 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=140.130213 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=107.733879 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 141.527946 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=87.627713 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=89.400712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=112.135213 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.948463 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 95.778025 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5855.083425 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5855.083425 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=122.422712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=148.549879 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=145.220712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=149.371546 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=153.106379 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=148.555379 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=149.314712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=150.874046 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=140.130213 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=107.733879 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 141.527946 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=87.627713 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=89.400712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=112.135213 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.948463 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 95.778025 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5855.083425 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5855.083425 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=122.422712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=148.549879 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=145.220712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=149.371546 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=153.106379 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=148.555379 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=149.314712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=150.874046 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=140.130213 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=107.733879 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 141.527946 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=87.627713 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=89.400712 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=112.135213 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.948463 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 95.778025 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5855.083425 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5855.083425 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
Metadata Value
Operator AS
Date 2026-07-24T23:52:16.297+00:00
X-hybrid program LS_Hybrid.src
Powerboard program LS_PB.src
Gluing method Dispenser
Field Weight/Volume
Weight bare sensor [g] 7.207
Weight of x-hybrid [g] 2.974
Weight of x-tabs [g] 0.190
Weight of back-end wirebonds 0.000
Weights of powerboard [g] 2.295
Weight of stuffed module [g] 12.547
Weight of glue [mg] 261.300
Metrology results
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_0] Height in z : 636.845000 +/- 10.893289 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_0] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 636.851788
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 106.851788 +/- 14.792259 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 637.851788 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_1] Height in z : 664.809833 +/- 4.491752 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_1] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 664.816621
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 134.816621 +/- 10.969185 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 665.816621 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_2] Height in z : 666.218000 +/- 3.825491 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_2] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 666.224787
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 136.224787 +/- 10.713616 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 667.224787 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_3] Height in z : 663.794667 +/- 3.641575 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_3] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 663.801454
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 133.801454 +/- 10.649331 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 664.801454 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_4] Height in z : 673.454833 +/- 4.541762 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_4] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 673.461621
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 143.461621 +/- 10.989759 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 674.461621 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_5] Height in z : 671.312000 +/- 4.907757 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_5] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 671.318787
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 141.318787 +/- 11.145998 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 672.318787 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_6] Height in z : 671.508333 +/- 4.629944 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_6] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 671.515121
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 141.515121 +/- 11.026494 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 672.515121 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_7] Height in z : 673.243333 +/- 4.147394 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_7] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 673.250121
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 143.250121 +/- 10.832731 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 674.250121 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_8] Height in z : 669.068833 +/- 1.952447 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_8] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 669.075621
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 139.075621 +/- 10.196040 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 670.075621 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_9] Height in z : 640.770000 +/- 16.355039 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_9] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 640.776788
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 110.776788 +/- 19.173797 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 641.776788 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [HCC_X_0] Height in z : 673.890667 +/- 3.806759 um
MetrologySvc::analyzeGlueHeights INFO ----> [HCC_X_0] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 673.897454
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 143.897454 +/- 10.706942 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 674.897454 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_0] Height in z : 646.472667 +/- 3.163013 um
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_0] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 646.479454
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 116.479454 +/- 10.495325 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 647.479454 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_1] Height in z : 662.872500 +/- 10.307250 um
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_1] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 662.879287
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : 132.879287 +/- 14.366161 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 663.879287 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_2] Height in z : 450.979500 +/- 121.411295 um
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_2] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 450.986288
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 530.000000 +/- 10.000000 extra material : -79.013712 +/- 121.823026 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 451.986288 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [PB_1] Height in z : 642.819600 +/- 3.500788 um
MetrologySvc::analyzeGlueHeights INFO ----> [PB_1] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 642.826388
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 545.000000 +/- 15.000000 extra material : 97.826388 +/- 15.407878 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 643.826388 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [PB_2] Height in z : 624.334000 +/- 0.000000 um
MetrologySvc::analyzeGlueHeights INFO ----> [PB_2] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 624.340787
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 545.000000 +/- 15.000000 extra material : 79.340787 +/- 15.004906 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 625.340787 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [PB_3] Height in z : 640.621250 +/- 9.403500 um
MetrologySvc::analyzeGlueHeights INFO ----> [PB_3] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 640.628037
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 545.000000 +/- 15.000000 extra material : 95.628037 +/- 17.707993 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 641.628037 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [PB_4] Height in z : 638.201250 +/- 10.896500 um
MetrologySvc::analyzeGlueHeights INFO ----> [PB_4] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 638.208038
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 545.000000 +/- 15.000000 extra material : 93.208038 +/- 18.544026 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 639.208038 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [PB_5] Height in z : 495.941000 +/- 12.562459 um
MetrologySvc::analyzeGlueHeights INFO ----> [PB_5] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 495.947788
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 545.000000 +/- 15.000000 extra material : -49.052212 +/- 19.569429 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 496.947788 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO Printing associated surfaces for total height
MetrologySvc::analyzeTotalHeights INFO ----> [C1] Height in z : 3054.370000 +/- 0.000000 um
MetrologySvc::analyzeTotalHeights INFO ----> [C1] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeTotalHeights INFO ----> Difference in heights : 3054.376787
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO Printing associated surfaces for total height
MetrologySvc::analyzeTotalHeights INFO ----> [C2] Height in z : 3065.448000 +/- 0.000000 um
MetrologySvc::analyzeTotalHeights INFO ----> [C2] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeTotalHeights INFO ----> Difference in heights : 3065.454787
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO Printing associated surfaces for total height
MetrologySvc::analyzeTotalHeights INFO ----> [C3] Height in z : 3175.736000 +/- 0.000000 um
MetrologySvc::analyzeTotalHeights INFO ----> [C3] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeTotalHeights INFO ----> Difference in heights : 3175.742788
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO Printing associated surfaces for total height
MetrologySvc::analyzeTotalHeights INFO ----> [C4] Height in z : 3088.057000 +/- 0.000000 um
MetrologySvc::analyzeTotalHeights INFO ----> [C4] Height in z : -0.006788 +/- 0.383653 um
MetrologySvc::analyzeTotalHeights INFO ----> Difference in heights : 3088.063788
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO Printing associated surfaces for total height
MetrologySvc::analyzeTotalHeights INFO ----> [Shield] Height in z : 5730.757600 +/- 17.974856 um
MetrologySvc::analyzeTotalHeights INFO ----> [Shield] Height in z : 14.891337 +/- 33.542864 um
MetrologySvc::analyzeTotalHeights INFO ----> Difference in heights : 5715.866262
MetrologySvc::analyzeTotalHeights INFO ----> [Shield] Max height in z (shieldbox) : 5779.818000 +/- 17.974856 um
MetrologySvc::analyzeTotalHeights INFO ----> [Shield] Height in z : 14.891337 +/- 33.542864 um
MetrologySvc::analyzeTotalHeights INFO ----> Max difference in heights (shieldbox) : 5764.926662
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
IService::UPLOADDB INFO Working on test code MODULE_METROLOGY
MetrologySvc::uploadDB INFO Doing DB upload...
MetrologySvc::writeOutput INFO Writing common output file /home/data/output//MetrologyModules_PROD_LS_v1_thin_interposer//SCIPP-PRO_LS-0749/1//Data__SCIPP-PRO_LS-0749.txt
MetrologySvc::writeOutput INFO Writing results output file /home/data/output//MetrologyModules_PROD_LS_v1_thin_interposer//SCIPP-PRO_LS-0749/1//Results__SCIPP-PRO_LS-0749.txt
MetrologySvc::writeOutput INFO Writing common output file /home/data/output//MetrologyModules_PROD_LS_v1_thin_interposer//SCIPP-PRO_LS-0749/1//Data__SCIPP-PRO_LS-0749.txt
MetrologySvc::writeOutput INFO Writing results output file /home/data/output//MetrologyModules_PROD_LS_v1_thin_interposer//SCIPP-PRO_LS-0749/1//Results__SCIPP-PRO_LS-0749.txt
IService::log INFO Logging status 0111 for component SCIPP-PRO_LS-0749
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PRO_LS-0749/MetrologyModules_PROD_LS_v1_thin_interposer-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed Summary.pdf...
IService::install INFO Installed TotalStackUp.pdf...
IService::install INFO Installed Positions.pdf...
IService::install INFO Installed Data__SCIPP-PRO_LS-0749.txt...
IService::install INFO Installed Results__SCIPP-PRO_LS-0749.txt...
IService::install INFO Installed Results.json...
IService::install INFO Installed DB_READY_MODULE_MODULE_METROLOGY.json...
IService::install INFO Installed SCIPP-PRO_LS-0749.root...
IService::install INFO Installed status.json...
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleLS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleSS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PROD_v2 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalModules_PPA_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name TCModules_PROD_v0 ignored through users request!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
Metadata Value
Component type
Operator AS
Date 2026-07-24T16:24:42.378+00:00
Program version PROD_v1
Instrument SmartScope Flash 250
Wirebonding for SCIPP-PRO_LS-0749
WireBondSvc::run INFO Loading group FAILED_HYBRID_TO_PB
WireBondSvc::run INFO Loading group FAILED_MODULE_TO_FRAME
WireBondSvc::run INFO Loading group FAILED_ROW_1
WireBondSvc::run INFO Loading group FAILED_ROW_2
WireBondSvc::run INFO Loading group FAILED_ROW_3
WireBondSvc::run INFO Loading group FAILED_ROW_4
WireBondSvc::run INFO Loading group REPAIRED_HYBRID_TO_PB
WireBondSvc::run INFO Loading group REPAIRED_MODULE_TO_FRAME
WireBondSvc::run INFO Loading group REPAIRED_ROW_1
WireBondSvc::run INFO Loading group REPAIRED_ROW_2
WireBondSvc::run INFO Loading group REPAIRED_ROW_3
WireBondSvc::run INFO Loading group REPAIRED_ROW_4
IService::UPLOADDB INFO Working on test code MODULE_WIRE_BONDING
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION
IService::log INFO Logging status 0111 for component SCIPP-PRO_LS-0749
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PRO_LS-0749/ModuleBonding_v1-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed DB_READY_MODULE_MODULE_WIRE_BONDING.json...
IService::install INFO Installed DB_READY_MODULE_VISUAL_INSPECTION.json...
IService::install INFO Installed SCIPP-PRO_LS-0749.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//ModuleBonding_v1//SCIPP-PRO_LS-0754-1.config
IService::next INFO Scheduling ModuleBonding_SCIPP-PRO_LS-0754-1.json file to run...
IService::next INFO Writing results to /home/data/output//ModuleBonding_v1//SCIPP-PRO_LS-0754/1/
Metadata Value
Date 2026-07-28T21:13:28.878+00:00
Operator AS, LM
Bonder hk2
Version v1
Bond number Type Comment
Thermal cycling results
TCSvc::getListOfFilesFromDir INFO Scanning for test files 503-0037/20USBP05030037
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files 503-0037/20USBP05030037
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files DSG2608_X_014_A_H5/20USBHX2008023
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files DSG2608_X_014_A_H5/20USBHX2008023
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_3PG_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_STROBE_DELAY_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_PEDESTAL_TRIM_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_RESPONSE_CURVE_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_NO_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files VPA39573-W02786/20USBSL0002786
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files VPA39573-W02786/20USBSL0002786
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files SCIPP-PRO_LS-0749/20USBML1239624
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files SCIPP-PRO_LS-0749/20USBML1239624
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1239624_20260730_3_MODULE_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
IService::UPLOADDB INFO Working on test code PEDESTAL_TRIM_TC
IService::UPLOADDB INFO Working on test code STROBE_DELAY_TC
IService::UPLOADDB INFO Working on test code RESPONSE_CURVE_TC
IService::UPLOADDB INFO Working on test code NO_TC
IService::UPLOADDB INFO Working on test code MODULE_IV_AMAC_TC
IService::UPLOADDB INFO Working on test code HVSTABILITY
IService::UPLOADDB INFO Working on test code OPEN_CHANNEL_SEARCH_TC
IService::UPLOADDB INFO Working on test code MODULE_TC
IService::log INFO Logging status 0111 for component SCIPP-PRO_LS-0749
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PRO_LS-0749/TCModules_PROD_v0-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed 20USBHX2008023_TC_Noise.pdf...
IService::install INFO Installed 20USBHX2008023_TC_Averages_RC_innse.pdf...
IService::install INFO Installed 20USBHX2008023_TC_Averages_RC_gain.pdf...
IService::install INFO Installed 20USBML1239624_TC_AMAC_IV.pdf...
IService::install INFO Installed 20USBML1239624_TC_ENV_DATA.pdf...
IService::install INFO Installed DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260730_3_PEDESTAL_TRIM_TC.json...
IService::install INFO Installed DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260730_3_STROBE_DELAY_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_3PG_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_RESPONSE_CURVE_TC.json...
IService::install INFO Installed DB_READY_NO_TC_SN20USBHX2008023_20260730_3_NO_TC.json...
IService::install INFO Installed DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json...
IService::install INFO Installed DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008023_20260730_3_OPEN_CHANNEL_SEARCH_TC.json...
IService::install INFO Installed DB_READY_MODULE_TC_SN20USBML1239624_20260730_3_MODULE_TC.json...
IService::install INFO Installed SCIPP-PRO_LS-0749.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//TCModules_PROD_v0//SCIPP-PRO_LS-0755-1.config
IService::next INFO Scheduling SCIPP-PRO_LS-0749-0754-0755-0757_TC file to run...
IService::next INFO Writing results to /home/data/output//TCModules_PROD_v0//SCIPP-PRO_LS-0755/1/
Metadata Value
Date 2026-07-30T12:43:26.000Z
Duration [hrs] 22.000
Max Humidity [%] 0.000
Max Temperature [C] 22.274
Min Temperature [C] -34.204
Test Station SCIPP_COLDBOX2
ITSDAQ Version itsdaq_23_3_2023-2751-gac79f1a4d
User nl
Test Passed Problems
Open Channel Search True True
Pedestal Trim True False
Strobe Delay True False
3PG True False
Response Curve True False
Noise Occupancy True False
AMAC IV False False
HV Stability MISSING! MISSING!
Module TC True False
Defect # Description Chip Bank Run Number Chip # Channel(s)
1 3-10 Strip with high noise away 0 97
2 3-10 Strip with high gain away 9 1279
3 3-132 Strip with high noise away 2 358
4 3-132 Strip with high noise away 5 692
5 3-132 Strip with high gain away 9 1279
6 3-149 Strip with high noise away 2 342
7 3-149 Strip with high noise away 6 868
8 3-166 Strip with high gain away 9 1279
9 3-183 Strip with high noise away 8 1107
10 3-200 Strip with high gain away 9 1279
11 3-200 Strip with high noise under 2 338
12 3-217 Strip with high noise away 6 868
13 3-217 Strip with high noise away 9 1279
14 3-234 Strip with high noise away 6 868
15 3-234 Strip with high gain away 9 1279
16 3-251 Strip with high noise under 6 854
17 3-268 Strip with high gain away 9 1279
18 3-285 Strip with high noise away 5 692
19 3-302 Strip with high gain away 9 1279
20 3-302 Strip with high noise under 2 356
21 3-319 Strip with high noise away 0 103
22 3-336 Strip with high noise away 2 347
23 3-336 Strip with high gain away 9 1279
24 3-353 Strip with high noise under 6 847
25 3-370 Strip with high gain away 9 1279
26 3-388 Strip with high noise away 6 868
27 3-421 Strip with high noise away 8 1114
28 3-421 Strip with high gain away 9 1279
29 3-47 Strip with high noise away 5 686
30 3-64 Strip with high gain away 9 1279
31 3-81 Strip with high noise away 6 868
32 3-81 Strip with high noise away 7 1017
33 3-98 Strip with high gain away 9 1279
Comments
3-10 - 2 defects found affecting 2 strips 3-10 - 1 maximum consecutive defects 3-10 - Cuts from: LS link 0 3-10 - Cuts from: LS link 1 3-31 - Cuts from: LS link 0 3-31 - Cuts from: LS link 1 3-47 - 1 defects found affecting 1 strips 3-47 - 1 maximum consecutive defects 3-47 - Cuts from: LS link 0 3-47 - Cuts from: LS link 1 3-64 - 1 defects found affecting 1 strips 3-64 - 1 maximum consecutive defects 3-64 - Cuts from: LS link 0 3-64 - Cuts from: LS link 1 3-81 - 2 defects found affecting 2 strips 3-81 - 1 maximum consecutive defects 3-81 - Cuts from: LS link 0 3-81 - Cuts from: LS link 1 3-98 - 1 defects found affecting 1 strips 3-98 - 1 maximum consecutive defects 3-98 - Cuts from: LS link 0 3-98 - Cuts from: LS link 1 3-115 - Cuts from: LS link 0 3-115 - Cuts from: LS link 1 3-132 - 3 defects found affecting 3 strips 3-132 - 1 maximum consecutive defects 3-132 - Cuts from: LS link 0 3-132 - Cuts from: LS link 1 3-149 - 2 defects found affecting 2 strips 3-149 - 1 maximum consecutive defects 3-149 - Cuts from: LS link 0 3-149 - Cuts from: LS link 1 3-166 - 1 defects found affecting 1 strips 3-166 - 1 maximum consecutive defects 3-166 - Cuts from: LS link 0 3-166 - Cuts from: LS link 1 3-183 - 1 defects found affecting 1 strips 3-183 - 1 maximum consecutive defects 3-183 - Cuts from: LS link 0 3-183 - Cuts from: LS link 1 3-200 - 2 defects found affecting 2 strips 3-200 - 1 maximum consecutive defects 3-200 - Cuts from: LS link 0 3-200 - Cuts from: LS link 1 3-217 - 2 defects found affecting 2 strips 3-217 - 1 maximum consecutive defects 3-217 - Cuts from: LS link 0 3-217 - Cuts from: LS link 1 3-234 - 2 defects found affecting 2 strips 3-234 - 1 maximum consecutive defects 3-234 - Cuts from: LS link 0 3-234 - Cuts from: LS link 1 3-251 - 1 defects found affecting 1 strips 3-251 - 1 maximum consecutive defects 3-251 - Cuts from: LS link 0 3-251 - Cuts from: LS link 1 3-268 - 1 defects found affecting 1 strips 3-268 - 1 maximum consecutive defects 3-268 - Cuts from: LS link 0 3-268 - Cuts from: LS link 1 3-285 - 1 defects found affecting 1 strips 3-285 - 1 maximum consecutive defects 3-285 - Cuts from: LS link 0 3-285 - Cuts from: LS link 1 3-302 - 2 defects found affecting 2 strips 3-302 - 1 maximum consecutive defects 3-302 - Cuts from: LS link 0 3-302 - Cuts from: LS link 1 3-319 - 1 defects found affecting 1 strips 3-319 - 1 maximum consecutive defects 3-319 - Cuts from: LS link 0 3-319 - Cuts from: LS link 1 3-336 - 2 defects found affecting 2 strips 3-336 - 1 maximum consecutive defects 3-336 - Cuts from: LS link 0 3-336 - Cuts from: LS link 1 3-353 - 1 defects found affecting 1 strips 3-353 - 1 maximum consecutive defects 3-353 - Cuts from: LS link 0 3-353 - Cuts from: LS link 1 3-370 - 1 defects found affecting 1 strips 3-370 - 1 maximum consecutive defects 3-370 - Cuts from: LS link 0 3-370 - Cuts from: LS link 1 3-388 - 1 defects found affecting 1 strips 3-388 - 1 maximum consecutive defects 3-388 - Cuts from: LS link 0 3-388 - Cuts from: LS link 1 3-404 - Cuts from: LS link 0 3-404 - Cuts from: LS link 1 3-421 - 2 defects found affecting 2 strips 3-421 - 1 maximum consecutive defects 3-421 - Cuts from: LS link 0 3-421 - Cuts from: LS link 1
Thermal cycling results
TCSvc::getListOfFilesFromDir INFO Scanning for test files 503-0037/20USBP05030037
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files 503-0037/20USBP05030037
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files DSG2608_X_014_A_H5/20USBHX2008023
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files DSG2608_X_014_A_H5/20USBHX2008023
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_3PG_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_STROBE_DELAY_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_PEDESTAL_TRIM_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_RESPONSE_CURVE_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260730_3_NO_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files VPA39573-W02786/20USBSL0002786
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files VPA39573-W02786/20USBSL0002786
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files SCIPP-PRO_LS-0749/20USBML1239624
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files SCIPP-PRO_LS-0749/20USBML1239624
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1239624_20260730_3_MODULE_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
IService::UPLOADDB INFO Working on test code PEDESTAL_TRIM_TC
IService::UPLOADDB INFO Working on test code STROBE_DELAY_TC
IService::UPLOADDB INFO Working on test code RESPONSE_CURVE_TC
IService::UPLOADDB INFO Working on test code NO_TC
IService::UPLOADDB INFO Working on test code MODULE_IV_AMAC_TC
IService::UPLOADDB INFO Working on test code HVSTABILITY
IService::UPLOADDB INFO Working on test code OPEN_CHANNEL_SEARCH_TC
IService::UPLOADDB INFO Working on test code MODULE_TC
IService::log INFO Logging status 0111 for component SCIPP-PRO_LS-0749
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PRO_LS-0749/TCModules_PROD_v0-2/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed 20USBHX2008023_TC_Noise.pdf...
IService::install INFO Installed 20USBHX2008023_TC_Averages_RC_innse.pdf...
IService::install INFO Installed 20USBHX2008023_TC_Averages_RC_gain.pdf...
IService::install INFO Installed 20USBML1239624_TC_AMAC_IV.pdf...
IService::install INFO Installed 20USBML1239624_TC_ENV_DATA.pdf...
IService::install INFO Installed DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260730_3_PEDESTAL_TRIM_TC.json...
IService::install INFO Installed DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260730_3_STROBE_DELAY_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_3PG_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_RESPONSE_CURVE_TC.json...
IService::install INFO Installed DB_READY_NO_TC_SN20USBHX2008023_20260730_3_NO_TC.json...
IService::install INFO Installed DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json...
IService::install INFO Installed DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008023_20260730_3_OPEN_CHANNEL_SEARCH_TC.json...
IService::install INFO Installed DB_READY_MODULE_TC_SN20USBML1239624_20260730_3_MODULE_TC.json...
IService::install INFO Installed SCIPP-PRO_LS-0749.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//TCModules_PROD_v0//SCIPP-PRO_LS-0757-2.config
IService::next INFO Scheduling SCIPP-PRO_LS-0749-0754-0755-0757_TC file to run...
IService::next INFO Writing results to /home/data/output//TCModules_PROD_v0//SCIPP-PRO_LS-0757/2/
Metadata Value
Date 2026-07-30T12:43:26.000Z
Duration [hrs] 22.000
Max Humidity [%] 0.000
Max Temperature [C] 22.274
Min Temperature [C] -34.204
Test Station SCIPP_COLDBOX2
ITSDAQ Version itsdaq_23_3_2023-2751-gac79f1a4d
User nl
Test Passed Problems
Open Channel Search True True
Pedestal Trim True False
Strobe Delay True False
3PG True False
Response Curve True False
Noise Occupancy True False
AMAC IV False False
HV Stability MISSING! MISSING!
Module TC True False
Defect # Description Chip Bank Run Number Chip # Channel(s)
1 3-10 Strip with high noise away 0 97
2 3-10 Strip with high gain away 9 1279
3 3-132 Strip with high noise away 2 358
4 3-132 Strip with high noise away 5 692
5 3-132 Strip with high gain away 9 1279
6 3-149 Strip with high noise away 2 342
7 3-149 Strip with high noise away 6 868
8 3-166 Strip with high gain away 9 1279
9 3-183 Strip with high noise away 8 1107
10 3-200 Strip with high gain away 9 1279
11 3-200 Strip with high noise under 2 338
12 3-217 Strip with high noise away 6 868
13 3-217 Strip with high noise away 9 1279
14 3-234 Strip with high noise away 6 868
15 3-234 Strip with high gain away 9 1279
16 3-251 Strip with high noise under 6 854
17 3-268 Strip with high gain away 9 1279
18 3-285 Strip with high noise away 5 692
19 3-302 Strip with high gain away 9 1279
20 3-302 Strip with high noise under 2 356
21 3-319 Strip with high noise away 0 103
22 3-336 Strip with high noise away 2 347
23 3-336 Strip with high gain away 9 1279
24 3-353 Strip with high noise under 6 847
25 3-370 Strip with high gain away 9 1279
26 3-388 Strip with high noise away 6 868
27 3-421 Strip with high noise away 8 1114
28 3-421 Strip with high gain away 9 1279
29 3-47 Strip with high noise away 5 686
30 3-64 Strip with high gain away 9 1279
31 3-81 Strip with high noise away 6 868
32 3-81 Strip with high noise away 7 1017
33 3-98 Strip with high gain away 9 1279
Comments
3-10 - 2 defects found affecting 2 strips 3-10 - 1 maximum consecutive defects 3-10 - Cuts from: LS link 0 3-10 - Cuts from: LS link 1 3-31 - Cuts from: LS link 0 3-31 - Cuts from: LS link 1 3-47 - 1 defects found affecting 1 strips 3-47 - 1 maximum consecutive defects 3-47 - Cuts from: LS link 0 3-47 - Cuts from: LS link 1 3-64 - 1 defects found affecting 1 strips 3-64 - 1 maximum consecutive defects 3-64 - Cuts from: LS link 0 3-64 - Cuts from: LS link 1 3-81 - 2 defects found affecting 2 strips 3-81 - 1 maximum consecutive defects 3-81 - Cuts from: LS link 0 3-81 - Cuts from: LS link 1 3-98 - 1 defects found affecting 1 strips 3-98 - 1 maximum consecutive defects 3-98 - Cuts from: LS link 0 3-98 - Cuts from: LS link 1 3-115 - Cuts from: LS link 0 3-115 - Cuts from: LS link 1 3-132 - 3 defects found affecting 3 strips 3-132 - 1 maximum consecutive defects 3-132 - Cuts from: LS link 0 3-132 - Cuts from: LS link 1 3-149 - 2 defects found affecting 2 strips 3-149 - 1 maximum consecutive defects 3-149 - Cuts from: LS link 0 3-149 - Cuts from: LS link 1 3-166 - 1 defects found affecting 1 strips 3-166 - 1 maximum consecutive defects 3-166 - Cuts from: LS link 0 3-166 - Cuts from: LS link 1 3-183 - 1 defects found affecting 1 strips 3-183 - 1 maximum consecutive defects 3-183 - Cuts from: LS link 0 3-183 - Cuts from: LS link 1 3-200 - 2 defects found affecting 2 strips 3-200 - 1 maximum consecutive defects 3-200 - Cuts from: LS link 0 3-200 - Cuts from: LS link 1 3-217 - 2 defects found affecting 2 strips 3-217 - 1 maximum consecutive defects 3-217 - Cuts from: LS link 0 3-217 - Cuts from: LS link 1 3-234 - 2 defects found affecting 2 strips 3-234 - 1 maximum consecutive defects 3-234 - Cuts from: LS link 0 3-234 - Cuts from: LS link 1 3-251 - 1 defects found affecting 1 strips 3-251 - 1 maximum consecutive defects 3-251 - Cuts from: LS link 0 3-251 - Cuts from: LS link 1 3-268 - 1 defects found affecting 1 strips 3-268 - 1 maximum consecutive defects 3-268 - Cuts from: LS link 0 3-268 - Cuts from: LS link 1 3-285 - 1 defects found affecting 1 strips 3-285 - 1 maximum consecutive defects 3-285 - Cuts from: LS link 0 3-285 - Cuts from: LS link 1 3-302 - 2 defects found affecting 2 strips 3-302 - 1 maximum consecutive defects 3-302 - Cuts from: LS link 0 3-302 - Cuts from: LS link 1 3-319 - 1 defects found affecting 1 strips 3-319 - 1 maximum consecutive defects 3-319 - Cuts from: LS link 0 3-319 - Cuts from: LS link 1 3-336 - 2 defects found affecting 2 strips 3-336 - 1 maximum consecutive defects 3-336 - Cuts from: LS link 0 3-336 - Cuts from: LS link 1 3-353 - 1 defects found affecting 1 strips 3-353 - 1 maximum consecutive defects 3-353 - Cuts from: LS link 0 3-353 - Cuts from: LS link 1 3-370 - 1 defects found affecting 1 strips 3-370 - 1 maximum consecutive defects 3-370 - Cuts from: LS link 0 3-370 - Cuts from: LS link 1 3-388 - 1 defects found affecting 1 strips 3-388 - 1 maximum consecutive defects 3-388 - Cuts from: LS link 0 3-388 - Cuts from: LS link 1 3-404 - Cuts from: LS link 0 3-404 - Cuts from: LS link 1 3-421 - 2 defects found affecting 2 strips 3-421 - 1 maximum consecutive defects 3-421 - Cuts from: LS link 0 3-421 - Cuts from: LS link 1
Thermal cycling results
TCSvc::getListOfFilesFromDir INFO Scanning for test files 503-0037/20USBP05030037
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files 503-0037/20USBP05030037
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files DSG2608_X_014_A_H5/20USBHX2008023
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files DSG2608_X_014_A_H5/20USBHX2008023
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260803_3_PEDESTAL_TRIM_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260803_3_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260803_3_STROBE_DELAY_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260803_3_NO_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260803_3_RESPONSE_CURVE_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260803_3_3PG_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files VPA39573-W02786/20USBSL0002786
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files VPA39573-W02786/20USBSL0002786
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files SCIPP-PRO_LS-0749/20USBML1239624
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files SCIPP-PRO_LS-0749/20USBML1239624
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1239624_20260803_3_MODULE_IV_AMAC_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1239624_20260803_3_MODULE_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
IService::UPLOADDB INFO Working on test code PEDESTAL_TRIM_TC
IService::UPLOADDB INFO Working on test code STROBE_DELAY_TC
IService::UPLOADDB INFO Working on test code RESPONSE_CURVE_TC
IService::UPLOADDB INFO Working on test code NO_TC
IService::UPLOADDB INFO Working on test code MODULE_IV_AMAC_TC
IService::UPLOADDB INFO Working on test code HVSTABILITY
IService::UPLOADDB INFO Working on test code OPEN_CHANNEL_SEARCH_TC
IService::UPLOADDB INFO Working on test code MODULE_TC
IService::log INFO Logging status 0111 for component SCIPP-PRO_LS-0749
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PRO_LS-0749/TCModules_PROD_v0-3/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed 20USBHX2008023_TC_Noise.pdf...
IService::install INFO Installed 20USBHX2008023_TC_Averages_RC_innse.pdf...
IService::install INFO Installed 20USBHX2008023_TC_Averages_RC_gain.pdf...
IService::install INFO Installed 20USBML1239624_TC_AMAC_IV.pdf...
IService::install INFO Installed 20USBML1239624_TC_ENV_DATA.pdf...
IService::install INFO Installed DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260803_3_PEDESTAL_TRIM_TC.json...
IService::install INFO Installed DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260803_3_STROBE_DELAY_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260803_3_RESPONSE_CURVE_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260803_3_3PG_TC.json...
IService::install INFO Installed DB_READY_NO_TC_SN20USBHX2008023_20260803_3_NO_TC.json...
IService::install INFO Installed DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260803_3_MODULE_IV_AMAC_TC.json...
IService::install INFO Installed DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008023_20260803_3_OPEN_CHANNEL_SEARCH_TC.json...
IService::install INFO Installed DB_READY_MODULE_TC_SN20USBML1239624_20260803_3_MODULE_TC.json...
IService::install INFO Installed SCIPP-PRO_LS-0749.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//TCModules_PROD_v0//SCIPP-PRO_LS-0774-1.config
IService::next INFO Scheduling SCIPP-PRO_LS-0748-0749-0774-0772_TC file to run...
IService::next INFO Writing results to /home/data/output//TCModules_PROD_v0//SCIPP-PRO_LS-0774/1/
Metadata Value
Date 2026-08-03T16:42:09.000Z
Duration [hrs] 20.300
Max Humidity [%] 1.670
Max Temperature [C] 21.595
Min Temperature [C] -34.313
Test Station SCIPP_COLDBOX1
ITSDAQ Version itsdaq_23_3_2023-2763-g79e7ed7c2
User qbl
Test Passed Problems
Open Channel Search True True
Pedestal Trim True False
Strobe Delay True False
3PG True False
Response Curve True False
Noise Occupancy True False
AMAC IV False False
HV Stability MISSING! MISSING!
Module TC True False
Defect # Description Chip Bank Run Number Chip # Channel(s)
1 3-10 Strip with high gain away 9 1279
2 3-115 Strip with high noise away 0 0
3 3-132 Strip with high noise away 3 384
4 3-132 Strip with high gain away 9 1279
5 3-166 Strip with high gain away 9 1279
6 3-166 Strip with high noise under 4 633
7 3-200 Strip with high gain away 9 1279
8 3-234 Strip with high gain away 9 1279
9 3-251 Strip with high noise away 0 0
10 3-251 Strip with high noise under 8 1103
11 3-268 Strip with high gain away 9 1279
12 3-285 Strip with high noise away 0 0
13 3-285 Strip with high noise under 8 1103
14 3-302 Strip with high gain away 9 1279
15 3-31 Strip with high noise away 0 0
16 3-31 Strip with high noise away 9 1279
17 3-319 Strip with high noise away 0 0
18 3-319 Strip with high noise away 6 868
19 3-319 Strip with high noise under 3 384
20 3-336 Strip with high gain away 9 1279
21 3-370 Strip with high gain away 9 1279
22 3-388 Strip with high noise away 0 0
23 3-388 Strip with high noise away 6 868
24 3-388 Strip with high noise away 7 1017
25 3-404 Strip with high noise away 6 868
26 3-404 Strip with high noise away 8 1107
27 3-404 Strip with high noise under 2 314
28 3-404 Strip with high noise under 6 854
29 3-421 Strip with high noise away 6 868
30 3-421 Strip with high gain away 9 1279
31 3-421 Strip with high noise under 2 333
32 3-64 Strip with high gain away 9 1279
33 3-64 Strip with high noise under 3 435
34 3-81 Strip with high noise away 0 0
35 3-98 Strip with high noise away 6 868
36 3-98 Strip with high gain away 9 1279
37 3-98 Strip with high noise under 4 631
Comments
3-10 - 1 defects found affecting 1 strips 3-10 - 1 maximum consecutive defects 3-10 - Cuts from: LS link 0 3-10 - Cuts from: LS link 1 3-31 - 2 defects found affecting 2 strips 3-31 - 1 maximum consecutive defects 3-31 - Cuts from: LS link 0 3-31 - Cuts from: LS link 1 3-47 - Cuts from: LS link 0 3-47 - Cuts from: LS link 1 3-64 - 2 defects found affecting 2 strips 3-64 - 1 maximum consecutive defects 3-64 - Cuts from: LS link 0 3-64 - Cuts from: LS link 1 3-81 - 1 defects found affecting 1 strips 3-81 - 1 maximum consecutive defects 3-81 - Cuts from: LS link 0 3-81 - Cuts from: LS link 1 3-98 - 3 defects found affecting 3 strips 3-98 - 1 maximum consecutive defects 3-98 - Cuts from: LS link 0 3-98 - Cuts from: LS link 1 3-115 - 1 defects found affecting 1 strips 3-115 - 1 maximum consecutive defects 3-115 - Cuts from: LS link 0 3-115 - Cuts from: LS link 1 3-132 - 2 defects found affecting 2 strips 3-132 - 1 maximum consecutive defects 3-132 - Cuts from: LS link 0 3-132 - Cuts from: LS link 1 3-149 - Cuts from: LS link 0 3-149 - Cuts from: LS link 1 3-166 - 2 defects found affecting 2 strips 3-166 - 1 maximum consecutive defects 3-166 - Cuts from: LS link 0 3-166 - Cuts from: LS link 1 3-183 - Cuts from: LS link 0 3-183 - Cuts from: LS link 1 3-200 - 1 defects found affecting 1 strips 3-200 - 1 maximum consecutive defects 3-200 - Cuts from: LS link 0 3-200 - Cuts from: LS link 1 3-217 - Cuts from: LS link 0 3-217 - Cuts from: LS link 1 3-234 - 1 defects found affecting 1 strips 3-234 - 1 maximum consecutive defects 3-234 - Cuts from: LS link 0 3-234 - Cuts from: LS link 1 3-251 - 2 defects found affecting 2 strips 3-251 - 1 maximum consecutive defects 3-251 - Cuts from: LS link 0 3-251 - Cuts from: LS link 1 3-268 - 1 defects found affecting 1 strips 3-268 - 1 maximum consecutive defects 3-268 - Cuts from: LS link 0 3-268 - Cuts from: LS link 1 3-285 - 2 defects found affecting 2 strips 3-285 - 1 maximum consecutive defects 3-285 - Cuts from: LS link 0 3-285 - Cuts from: LS link 1 3-302 - 1 defects found affecting 1 strips 3-302 - 1 maximum consecutive defects 3-302 - Cuts from: LS link 0 3-302 - Cuts from: LS link 1 3-319 - 3 defects found affecting 3 strips 3-319 - 1 maximum consecutive defects 3-319 - Cuts from: LS link 0 3-319 - Cuts from: LS link 1 3-336 - 1 defects found affecting 1 strips 3-336 - 1 maximum consecutive defects 3-336 - Cuts from: LS link 0 3-336 - Cuts from: LS link 1 3-353 - Cuts from: LS link 0 3-353 - Cuts from: LS link 1 3-370 - 1 defects found affecting 1 strips 3-370 - 1 maximum consecutive defects 3-370 - Cuts from: LS link 0 3-370 - Cuts from: LS link 1 3-388 - 3 defects found affecting 3 strips 3-388 - 1 maximum consecutive defects 3-388 - Cuts from: LS link 0 3-388 - Cuts from: LS link 1 3-404 - 4 defects found affecting 4 strips 3-404 - 1 maximum consecutive defects 3-404 - Cuts from: LS link 0 3-404 - Cuts from: LS link 1 3-421 - 3 defects found affecting 3 strips 3-421 - 1 maximum consecutive defects 3-421 - Cuts from: LS link 0 3-421 - Cuts from: LS link 1
Thermal cycling results
TCSvc::getListOfFilesFromDir INFO Scanning for test files 503-0037/20USBP05030037
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files 503-0037/20USBP05030037
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files DSG2608_X_014_A_H5/20USBHX2008023
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files DSG2608_X_014_A_H5/20USBHX2008023
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260821_7_STROBE_DELAY_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260821_7_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260821_7_NO_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260821_7_3PG_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2008023_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files VPA39573-W02786/20USBSL0002786
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files VPA39573-W02786/20USBSL0002786
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files SCIPP-PRO_LS-0749/20USBML1239624
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files SCIPP-PRO_LS-0749/20USBML1239624
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1239624_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1239624_20260820_3_MODULE_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
IService::UPLOADDB INFO Working on test code PEDESTAL_TRIM_TC
IService::UPLOADDB INFO Working on test code STROBE_DELAY_TC
IService::UPLOADDB INFO Working on test code RESPONSE_CURVE_TC
IService::UPLOADDB INFO Working on test code NO_TC
IService::UPLOADDB INFO Working on test code MODULE_IV_AMAC_TC
IService::UPLOADDB INFO Working on test code HVSTABILITY
IService::UPLOADDB INFO Working on test code OPEN_CHANNEL_SEARCH_TC
IService::UPLOADDB INFO Working on test code MODULE_TC
IService::log INFO Logging status 0111 for component SCIPP-PRO_LS-0749
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PRO_LS-0749/TCModules_PROD_v0-4/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed 20USBHX2008023_TC_Noise.pdf...
IService::install INFO Installed 20USBHX2008023_TC_Averages_RC_innse.pdf...
IService::install INFO Installed 20USBHX2008023_TC_Averages_RC_gain.pdf...
IService::install INFO Installed 20USBML1239624_TC_AMAC_IV.pdf...
IService::install INFO Installed 20USBML1239624_TC_ENV_DATA.pdf...
IService::install INFO Installed DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260821_7_PEDESTAL_TRIM_TC.json...
IService::install INFO Installed DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260821_7_STROBE_DELAY_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260821_7_3PG_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260821_7_RESPONSE_CURVE_TC.json...
IService::install INFO Installed DB_READY_NO_TC_SN20USBHX2008023_20260821_7_NO_TC.json...
IService::install INFO Installed DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260821_7_MODULE_IV_AMAC_TC.json...
IService::install INFO Installed DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008023_20260821_7_OPEN_CHANNEL_SEARCH_TC.json...
IService::install INFO Installed DB_READY_MODULE_TC_SN20USBML1239624_20260820_3_MODULE_TC.json...
IService::install INFO Installed SCIPP-PRO_LS-0749.root...
IService::install INFO Installed status.json...
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=106.851788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.816621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=136.224787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=133.801454 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=143.461621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=141.318787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=141.515121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.250121 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=139.075621 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=110.776788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.109271 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=97.826388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=79.340787 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=95.628037 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=93.208038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 91.500812 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5764.926662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5764.926662 is within allowed range!
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260730_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260730_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008023_20260730_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260730_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260730_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008023_20260730_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260730_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260730_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008023_20260730_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260730_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260730_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260730_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008023_20260730_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260803_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260803_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260803_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260803_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008023_20260803_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260803_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260803_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260803_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260803_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260803_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008023_20260803_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260803_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008023_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008023_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008023_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008023_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008023_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260821_7_MODULE_IV_AMAC_TC.json
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=119.469971 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=134.740804 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=138.511638 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=147.646804 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=144.139304 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=145.060138 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=146.718138 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.644971 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=143.731471 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=118.190638 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 138.185388 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=69.231837 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=100.217638 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=119.443887 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=83.506888 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 93.100063 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5811.490250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5811.490250 is within allowed range!
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008072_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008072_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008072_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008072_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008072_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239638_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008072_20260821_7_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1239638_20260820_3_MODULE_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008072_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008072_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008072_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008072_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008072_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239638_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008072_20260821_7_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1239638_20260820_3_MODULE_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008072_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008072_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008072_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008072_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008072_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239638_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008072_20260821_7_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1239638_20260820_3_MODULE_TC.json
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=108.647704 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=130.393704 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.899038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=138.244704 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=138.393704 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=144.422871 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=146.505871 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=143.263204 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=143.194538 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=106.055871 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 133.402121 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=80.604437 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=134.207038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=107.203038 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=77.860788 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 99.968825 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5773.214175 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5773.214175 is within allowed range!
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008137_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008137_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008137_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008137_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008137_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239846_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008137_20260821_7_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1239846_20260820_3_MODULE_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008137_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008137_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008137_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008137_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008137_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239846_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008137_20260821_7_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1239846_20260820_3_MODULE_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008137_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008137_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008137_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008137_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008137_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239846_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008137_20260821_7_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1239846_20260820_3_MODULE_TC.json
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=112.966717 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=137.382883 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=139.139717 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=148.555883 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=150.928383 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=139.455550 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=146.965717 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=153.074383 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=151.987883 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=117.090550 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 139.754767 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=105.600250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=128.328050 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=115.097300 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=115.611300 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 116.159225 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5768.445200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5768.445200 is within allowed range!
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008151_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008151_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008151_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008151_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008151_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239847_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008151_20260821_7_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1239847_20260820_3_MODULE_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008151_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008151_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008151_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008151_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008151_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239847_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008151_20260821_7_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1239847_20260820_3_MODULE_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2008151_20260821_7_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2008151_20260821_7_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008151_20260821_7_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2008151_20260821_7_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2008151_20260821_7_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239847_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2008151_20260821_7_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1239847_20260820_3_MODULE_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260730_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260803_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260803_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260821_7_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1239624_20260821_7_MODULE_IV_AMAC_TC.json
Metadata Value
Date 2026-08-20T14:07:42.000Z
Duration [hrs] 26.600
Max Humidity [%] 0.011
Max Temperature [C] 22.645
Min Temperature [C] -33.269
Test Station SCIPP_COLDBOX2
ITSDAQ Version itsdaq_23_3_2023-2825-gf2a2e9bc5
User qbl
Test Passed Problems
Open Channel Search True True
Pedestal Trim True False
Strobe Delay True False
3PG True False
Response Curve True False
Noise Occupancy True False
AMAC IV False False
HV Stability MISSING! MISSING!
Module TC True False
Defect # Description Chip Bank Run Number Chip # Channel(s)
1 3-121 Strip with high noise away 6 842
2 3-121 Strip with high gain away 9 1279
3 3-225 Strip with high noise away 9 1279
4 3-299 Strip with high gain away 9 1279
5 3-299 Strip with high noise under 4 631
6 3-333 Strip with high gain away 9 1279
7 3-367 Strip with high gain away 9 1279
8 3-384 Strip with high noise away 5 692
9 3-401 Strip with high noise away 6 868
10 3-401 Strip with high gain away 9 1279
11 3-435 Strip with high noise away 6 868
12 3-452 Strip with high noise under 6 854
13 3-469 Strip with high gain away 9 1279
14 3-503 Strip with high noise away 5 698
15 3-503 Strip with high gain away 9 1279
16 7-10 Strip with high noise away 5 686
17 7-10 Strip with high noise away 6 868
18 7-10 Strip with high gain away 9 1279
19 7-132 Strip with high gain away 9 1279
20 7-149 Strip with high noise away 7 1017
21 7-166 Strip with high noise away 6 816
22 7-166 Strip with high noise away 6 868
23 7-166 Strip with high gain away 9 1279
24 7-217 Strip with high gain away 9 1279
25 7-64 Strip with high noise away 6 868
26 7-64 Strip with high gain away 9 1279
27 7-81 Strip with high noise away 6 868
28 7-98 Strip with high gain away 9 1279
Comments
3-121 - 2 defects found affecting 2 strips 3-121 - 1 maximum consecutive defects 3-121 - Cuts from: LS link 0 3-121 - Cuts from: LS link 1 3-225 - 1 defects found affecting 1 strips 3-225 - 1 maximum consecutive defects 3-225 - Cuts from: LS link 0 3-225 - Cuts from: LS link 1 3-282 - Cuts from: LS link 0 3-282 - Cuts from: LS link 1 3-299 - 2 defects found affecting 2 strips 3-299 - 1 maximum consecutive defects 3-299 - Cuts from: LS link 0 3-299 - Cuts from: LS link 1 3-316 - Cuts from: LS link 0 3-316 - Cuts from: LS link 1 3-333 - 1 defects found affecting 1 strips 3-333 - 1 maximum consecutive defects 3-333 - Cuts from: LS link 0 3-333 - Cuts from: LS link 1 3-350 - Cuts from: LS link 0 3-350 - Cuts from: LS link 1 3-367 - 1 defects found affecting 1 strips 3-367 - 1 maximum consecutive defects 3-367 - Cuts from: LS link 0 3-367 - Cuts from: LS link 1 3-384 - 1 defects found affecting 1 strips 3-384 - 1 maximum consecutive defects 3-384 - Cuts from: LS link 0 3-384 - Cuts from: LS link 1 3-401 - 2 defects found affecting 2 strips 3-401 - 1 maximum consecutive defects 3-401 - Cuts from: LS link 0 3-401 - Cuts from: LS link 1 3-418 - Cuts from: LS link 0 3-418 - Cuts from: LS link 1 3-435 - 1 defects found affecting 1 strips 3-435 - 1 maximum consecutive defects 3-435 - Cuts from: LS link 0 3-435 - Cuts from: LS link 1 3-452 - 1 defects found affecting 1 strips 3-452 - 1 maximum consecutive defects 3-452 - Cuts from: LS link 0 3-452 - Cuts from: LS link 1 3-469 - 1 defects found affecting 1 strips 3-469 - 1 maximum consecutive defects 3-469 - Cuts from: LS link 0 3-469 - Cuts from: LS link 1 3-486 - Cuts from: LS link 0 3-486 - Cuts from: LS link 1 3-503 - 2 defects found affecting 2 strips 3-503 - 1 maximum consecutive defects 3-503 - Cuts from: LS link 0 3-503 - Cuts from: LS link 1 3-520 - Cuts from: LS link 0 3-520 - Cuts from: LS link 1 7-10 - 3 defects found affecting 3 strips 7-10 - 1 maximum consecutive defects 7-10 - Cuts from: LS link 0 7-10 - Cuts from: LS link 1 7-31 - Cuts from: LS link 0 7-31 - Cuts from: LS link 1 7-47 - Cuts from: LS link 0 7-47 - Cuts from: LS link 1 7-64 - 2 defects found affecting 2 strips 7-64 - 1 maximum consecutive defects 7-64 - Cuts from: LS link 0 7-64 - Cuts from: LS link 1 7-81 - 1 defects found affecting 1 strips 7-81 - 1 maximum consecutive defects 7-81 - Cuts from: LS link 0 7-81 - Cuts from: LS link 1 7-98 - 1 defects found affecting 1 strips 7-98 - 1 maximum consecutive defects 7-98 - Cuts from: LS link 0 7-98 - Cuts from: LS link 1 7-115 - Cuts from: LS link 0 7-115 - Cuts from: LS link 1 7-132 - 1 defects found affecting 1 strips 7-132 - 1 maximum consecutive defects 7-132 - Cuts from: LS link 0 7-132 - Cuts from: LS link 1 7-149 - 1 defects found affecting 1 strips 7-149 - 1 maximum consecutive defects 7-149 - Cuts from: LS link 0 7-149 - Cuts from: LS link 1 7-166 - 3 defects found affecting 3 strips 7-166 - 1 maximum consecutive defects 7-166 - Cuts from: LS link 0 7-166 - Cuts from: LS link 1 7-184 - Cuts from: LS link 0 7-184 - Cuts from: LS link 1 7-200 - Cuts from: LS link 0 7-200 - Cuts from: LS link 1 7-217 - 1 defects found affecting 1 strips 7-217 - 1 maximum consecutive defects 7-217 - Cuts from: LS link 0 7-217 - Cuts from: LS link 1