Results for SCIPP-PS_LS-0131
The information on this page was generated on Tue Mar 31 09:48:03 2026 (probably UTC).
SCIPP-PS_LS-0131 after gluing Inconsistent breakdown before TC, usually > 500 V warm. Cycled anyway for fun. During middle of TC the cold tests start breaking down < 350 V. Last warm IV after HVStability also breaks down < 350V. - Alex, 29.07.2025--20-10-36
Brief description of DB components associated to this Module and associated tests Shown below are results for the HVTab IV
The current measurements are calibrated to a common temperature using the following relationship:
$$I_{temp}^{SF} = \left ( \frac{T_{ref}}{T_{meas}} \right )^{2} \times e^{eE_{g}^{Si} \frac{T_{ref}-T_{meas}}{2 k_{B} T_{ref} T_{meas} }} $$
where \( T_{ref} \) is the reference temperature,
\( T_{meas} \) is the temperatured measured during the test,
\( e \) is the electric charge,
\( E_{g}^{Si} \) is the band gap energy of silicon, and
\( k_{B} \) is the Boltzman constant
Shown below are results for the glue weight measurements Shown below are the results of the module metrology scans The glue thicknesses are shown below. The positions are defined as the hybrid cross fiducials and the circles on the powerboard Height of components on the powerboard Wirebonding summaries will be given below Shown below are results for the Module IV
The current measurements are calibrated to a common temperature using the following relationship:
$$I_{temp}^{SF} = \left ( \frac{T_{ref}}{T_{meas}} \right )^{2} \times e^{eE_{g}^{Si} \frac{T_{ref}-T_{meas}}{2 k_{B} T_{ref} T_{meas} }} $$
where \( T_{ref} \) is the reference temperature,
\( T_{meas} \) is the temperatured measured during the test,
\( e \) is the electric charge,
\( E_{g}^{Si} \) is the band gap energy of silicon, and
\( k_{B} \) is the Boltzman constant
Thermal cycling summaries will be given below
Test Summary Response Curve Defect Summary Comments Figures of gain and noise, and correlations with wafer/hybrid level test results, if they exist. Thermal cycling summaries will be given below
Test Summary Response Curve Defect Summary Comments Figures of gain and noise, and correlations with wafer/hybrid level test results, if they exist. Thermal cycling summaries will be given below
Test Summary Response Curve Defect Summary Comments Figures of gain and noise, and correlations with wafer/hybrid level test results, if they exist.
You may click the button below to manually regenerate the content.
Photos of GeneralPicture_Module_2025-07-23_18-43-34
Comments for SCIPP-PS_LS-0131
Early breakdown during TC especially in the cold tests, < 350 V. Nothing obvious from treatment or VI - Alex, 30.07.2025--00-54-10 Basic Information for SCIPP-PS_LS-0131
Click for packaging sticker
Metadata Value
Alt Identifier UCSC-BARREL_LS_MODULE-0325 Serial Number 20USBML1236258 Batch PRESERIES_UCSC Assembled False Completed False Current Location SCIPP, UC Santa Cruz Manufacture ID SCIPP-PS_LS-0131 User SCIPP Module Institute Account
Children
Alt Identifier Local Name Serial Number Type Trashed Completed Timestamp
20USBP05009511 B3 False True 2025-07-23T19:03:45.071Z
UCSC-X-0519 GPC2328_X_002_A_H0 20USBHX2003085 X False False 2025-07-23T18:59:37.672Z
VPA38892-W02328 20USBSL0002328 ATLAS18LS False True 2025-07-09T22:10:30.065Z
Parents
Component Type Timestamp
Module Frame
Name Current Stage Timestamp
Test Name Passed? Date
Module IV with PS V1 2025-07-10T23:37:37.807Z
Visual Inspection 2025-07-25T21:51:08.473Z
Module glue weights 2025-07-23T20:17:16.393Z
Module Metrology 2025-07-23T16:21:31.240Z
Module Wire Bonding 2025-07-25T21:51:08.473Z
HVTab IV for SCIPP-PS_LS-0131
SensorIVSvc::read INFO Using measurement with voltage 700.340000 and current 0.076770 for current stability calculation
SensorIVSvc::read INFO Using measurement with voltage 700.340000 and current 0.076270 for current stability calculation
SensorIVSvc::read INFO Using measurement with voltage 700.340000 and current 0.076270 for current stability calculation
SensorIVSvc::read INFO Using measurement with voltage 700.340000 and current 0.075970 for current stability calculation
SensorIVSvc::CalculateVBD INFO Average voltage 5.030000, current 0.013450, dIdV 0.002592
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.969182 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 15.010000, current 0.030305, dIdV 0.000793
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.392976 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 25.020000, current 0.036810, dIdV 0.000506
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.343932 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 35.020000, current 0.039415, dIdV 0.000015
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.013327 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 45.020000, current 0.040970, dIdV 0.000296
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.325260 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 55.029999, current 0.042675, dIdV 0.000045
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.057912 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 65.050003, current 0.044080, dIdV 0.000236
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.347576 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 75.080002, current 0.043885, dIdV -0.000274
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.468605 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 85.070000, current 0.042490, dIdV -0.000004
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.008057 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 95.040001, current 0.044600, dIdV 0.000426
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.907781 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 105.059998, current 0.045805, dIdV -0.000184
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.422632 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 115.090004, current 0.045210, dIdV 0.000066
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.167679 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 125.099998, current 0.045565, dIdV 0.000005
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.013728 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 135.120010, current 0.044015, dIdV -0.000314
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.963154 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 145.139999, current 0.044120, dIdV 0.000336
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.105327 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 155.139999, current 0.046730, dIdV 0.000186
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.617506 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 165.149994, current 0.047435, dIdV -0.000045
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.156360 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 175.160004, current 0.047540, dIdV 0.000066
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.243175 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 185.169998, current 0.047795, dIdV -0.000015
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.057998 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 195.209991, current 0.047495, dIdV -0.000045
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.183852 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 205.229996, current 0.047050, dIdV -0.000044
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.192311 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 215.210007, current 0.048110, dIdV 0.000257
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.147457 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 225.209991, current 0.049015, dIdV -0.000075
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.343916 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 235.240005, current 0.049470, dIdV 0.000165
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.786219 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 245.259995, current 0.051625, dIdV 0.000265
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.258962 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 255.259995, current 0.052680, dIdV -0.000054
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.261656 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 265.260010, current 0.053590, dIdV 0.000236
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.168154 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 275.279999, current 0.055295, dIdV 0.000105
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.520648 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 285.299988, current 0.055795, dIdV -0.000005
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.025567 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 295.309998, current 0.056250, dIdV 0.000096
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.502990 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 305.330017, current 0.056005, dIdV -0.000145
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.788938 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 315.169983, current 0.055970, dIdV 0.000143
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.804436 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 325.010010, current 0.057290, dIdV 0.000126
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.713380 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 335.019989, current 0.057095, dIdV -0.000165
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.968181 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 345.019989, current 0.057450, dIdV 0.000236
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.417314 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 355.019989, current 0.057755, dIdV -0.000175
SensorIVSvc::CalculateVBD INFO V_avg_BD -1.075725 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 365.049988, current 0.058360, dIdV 0.000294
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.840479 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 375.070007, current 0.059765, dIdV -0.000015
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.094325 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 385.070007, current 0.060720, dIdV 0.000206
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.303789 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 395.079987, current 0.061325, dIdV -0.000085
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.547604 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 405.079987, current 0.061380, dIdV 0.000096
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.633556 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 415.089996, current 0.062090, dIdV 0.000046
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.306910 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 425.110016, current 0.063145, dIdV 0.000165
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.108609 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 435.130005, current 0.063395, dIdV -0.000115
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.787760 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 445.149994, current 0.063050, dIdV 0.000046
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.324124 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 455.140015, current 0.062660, dIdV -0.000124
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.904309 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 465.139984, current 0.062965, dIdV 0.000184
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.361202 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 475.140015, current 0.063470, dIdV -0.000084
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.631354 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 485.130005, current 0.063025, dIdV -0.000005
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.038410 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 495.140015, current 0.062480, dIdV -0.000104
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.824177 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 505.140015, current 0.064190, dIdV 0.000446
SensorIVSvc::CalculateVBD INFO V_avg_BD 3.509775 and VBD limit 5.551400
SensorIVSvc::CalculateVBD INFO Average voltage 515.160034, current 0.066695, dIdV 0.000055
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.423134 and VBD limit 5.651600
SensorIVSvc::CalculateVBD INFO Average voltage 525.179993, current 0.065850, dIdV -0.000224
SensorIVSvc::CalculateVBD INFO V_avg_BD -1.786489 and VBD limit 5.751800
SensorIVSvc::CalculateVBD INFO Average voltage 535.179993, current 0.065655, dIdV 0.000185
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.508009 and VBD limit 5.851800
SensorIVSvc::CalculateVBD INFO Average voltage 545.200012, current 0.066810, dIdV 0.000046
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.373885 and VBD limit 5.952000
SensorIVSvc::CalculateVBD INFO Average voltage 555.209961, current 0.067515, dIdV 0.000095
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.782799 and VBD limit 6.052100
SensorIVSvc::CalculateVBD INFO Average voltage 565.179993, current 0.068020, dIdV 0.000006
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.050054 and VBD limit 6.151800
SensorIVSvc::CalculateVBD INFO Average voltage 575.159973, current 0.067880, dIdV -0.000034
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.288088 and VBD limit 6.251600
SensorIVSvc::CalculateVBD INFO Average voltage 585.179993, current 0.068935, dIdV 0.000244
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.071486 and VBD limit 6.351800
SensorIVSvc::CalculateVBD INFO Average voltage 595.200012, current 0.069540, dIdV -0.000124
SensorIVSvc::CalculateVBD INFO V_avg_BD -1.061329 and VBD limit 6.452000
SensorIVSvc::CalculateVBD INFO Average voltage 605.210022, current 0.070195, dIdV 0.000254
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.194181 and VBD limit 6.552100
SensorIVSvc::CalculateVBD INFO Average voltage 615.229980, current 0.071400, dIdV -0.000014
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.120393 and VBD limit 6.652300
SensorIVSvc::CalculateVBD INFO Average voltage 625.250000, current 0.070355, dIdV -0.000195
SensorIVSvc::CalculateVBD INFO V_avg_BD -1.729520 and VBD limit 6.752500
SensorIVSvc::CalculateVBD INFO Average voltage 635.280029, current 0.070555, dIdV 0.000234
SensorIVSvc::CalculateVBD INFO V_avg_BD 2.107519 and VBD limit 6.852800
SensorIVSvc::CalculateVBD INFO Average voltage 645.279968, current 0.072010, dIdV 0.000056
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.503830 and VBD limit 6.952800
SensorIVSvc::CalculateVBD INFO Average voltage 655.270020, current 0.072920, dIdV 0.000126
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.129995 and VBD limit 7.052700
SensorIVSvc::CalculateVBD INFO Average voltage 665.280029, current 0.073675, dIdV 0.000025
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.225748 and VBD limit 7.152800
SensorIVSvc::CalculateVBD INFO Average voltage 675.299988, current 0.074580, dIdV 0.000155
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.406907 and VBD limit 7.253000
SensorIVSvc::CalculateVBD INFO Average voltage 685.320007, current 0.075635, dIdV 0.000055
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.498349 and VBD limit 7.353200
SensorIVSvc::CalculateVBD INFO Average voltage 695.330017, current 0.076340, dIdV 0.000086
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.781753 and VBD limit 7.453300
SensorIVSvc::CalculateVBD INFO Calculated VBD to be 690.320007
SensorIVSvc::read INFO Mean voltage for current stability 0.076320 calculated with 4 points
SensorIVSvc::read INFO RMS current stability 0.003763
IService::UPLOADDB INFO Working on test code MODULE_IV_PS_V1
SensorIVSvc::uploadDB INFO Formatting database upload for MODULE_IV_PS_V1 and run number 1
SensorIVSvc::writeOutput INFO Writing results output file /home/data/output//SensorIV_PostTabIV_PPB_v1//SCIPP-PS_LS-0131/1//20USBML1236258-HV_TAB_ATTACHED_IV_001.dat
SensorIVSvc::getDate INFO Parsing date 2025-07-10T23:37:37.807+00:00...
SensorIVSvc::getDate INFO Year 2025
SensorIVSvc::getDate INFO Month 7
SensorIVSvc::getDate INFO Day 10
SensorIVSvc::getDate INFO Hour 23
SensorIVSvc::getDate INFO Minute 37
SensorIVSvc::getDate INFO Second 37
SensorIVSvc::getDate INFO Offset 0:0
SensorIVSvc::getDate INFO Converted month into string Jul
SensorIVSvc::getDate INFO FINALLY obtained 10 Jul 2025
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION
SensorIVSvc::uploadDB INFO Formatting database upload for VISUAL_INSPECTION and run number 1
IService::log INFO Logging status 0111 for component SCIPP-PS_LS-0131
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PS_LS-0131/SensorIV_PostTabIV_PPB_v1-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed IVCurve.pdf...
IService::install INFO Installed 20USBML1236258-HV_TAB_ATTACHED_IV_001.dat...
IService::install INFO Installed DB_READY_MODULE_MODULE_IV_PS_V1.json...
IService::install INFO Installed DB_READY_MODULE_VISUAL_INSPECTION.json...
IService::install INFO Installed SCIPP-PS_LS-0131.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//SensorIV_PostTabIV_PPB_v1//SCIPP-PS_LS-0130-1.config
IService::next INFO Scheduling Data_SCIPP-PS_LS-0130-1.txt file to run...
IService::next INFO Writing results to /home/data/output//SensorIV_PostTabIV_PPB_v1//SCIPP-PS_LS-0130/1/
Metadata Value
Component type ATLAS18LS
Operator tate
Date 2025-07-10T23:37:37.807+00:00
Institute UCSC
Power supply CAEN_DT1415ET
Temperarture [C] 18.8
Humidity 1.3
Current per area @500V 0.721
Breakdown voltage 690.320
Current stability (RMS@700V) 0.004
Glue weight for SCIPP-PS_LS-0131
IService::UPLOADDB INFO Working on test code GLUE_WEIGHT
GlueWeightSvc::uploadDB INFO Formatting database test for GLUE_WEIGHT
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION
IService::log INFO Logging status 0111 for component SCIPP-PS_LS-0131
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PS_LS-0131/GlueWeightModule_LS_PPA-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed DB_COMMENTS.json...
IService::install INFO Installed DB_READY_MODULE_GLUE_WEIGHT.json...
IService::install INFO Installed DB_READY_MODULE_VISUAL_INSPECTION.json...
IService::install INFO Installed SCIPP-PS_LS-0131.root...
IService::install INFO Installed status.json...
TopControl::monitor INFO Service with algoirthm name GlueWeightModule_SS_PPA ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridBonding_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleBonding_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPullTest ignored through users request!
TopControl::monitor INFO Service with algoirthm name PullTestCicorelCard ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridFlexArray_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name Powerboards_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ABC_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ABC_Wafer_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HCC_PullTest_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorBondingQC_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HVTabSheet_SheerTest_Before_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HVTabSheet_SheerTest_After_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name PhotoUpload ignored through users request!
TopControl::monitor INFO Service with algoirthm name PictureModule ignored through users request!
TopControl::monitor INFO Service with algoirthm name GeneralPictures ignored through users request!
TopControl::monitor INFO Service with algoirthm name PreHVTabIV ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_PreTabIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name Module_postHVTabIV_LS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_PostTabIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalIV ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_Module_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SensorIV_AMACIV_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name SixWayJig_Y_slots ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPanelMetrology ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridPanelMetrology_v7 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology_v8 ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridMetrology_Y_v8 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_v10 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_v10-beta ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_Y_v0_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_Y_v0_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2_thick ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyHybrid_PROD_X_v2_thick_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name HybridToSensorMetrology_v2a ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_v8 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_v8a ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PPA_SS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PPB_SS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PPB_SS_wuerth_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PPB_LS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleLS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleSS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PROD_v2 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalModules_PPA_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name TCModules_PROD_v0 ignored through users request!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
Metadata Value
Operator FMM, KA
Date 2025-07-23T20:17:16.393+00:00
X-hybrid program LS_Hybrid.src
Powerboard program LS_PB.src
Gluing method Dispenser
Field Weight/Volume
Weight bare sensor [g] 7.149
Weight of x-hybrid [g] 3.309
Weight of x-tabs [g] 0.212
Weight of back-end wirebonds 0.000
Weights of powerboard [g] 2.360
Weight of stuffed module [g] 12.873
Weight of glue [mg] 266.700
Metrology results
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_0] Height in z : 673.693000 +/- 13.577113 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_0] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 673.785125
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 93.785125 +/- 16.880093 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 674.785125 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_1] Height in z : 708.049500 +/- 5.392960 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_1] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 708.141625
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 128.141625 +/- 11.387868 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 709.141625 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_2] Height in z : 713.786000 +/- 5.188836 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_2] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 713.878125
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 133.878125 +/- 11.292632 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 714.878125 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_3] Height in z : 709.344333 +/- 5.600554 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_3] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 709.436458
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 129.436458 +/- 11.487634 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 710.436458 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_4] Height in z : 715.129500 +/- 7.875518 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_4] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 715.221625
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 135.221625 +/- 12.752385 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 716.221625 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_5] Height in z : 718.330333 +/- 7.502787 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_5] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 718.422458
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 138.422458 +/- 12.525628 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 719.422458 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_6] Height in z : 712.889500 +/- 5.710985 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_6] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 712.981625
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 132.981625 +/- 11.541875 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 713.981625 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_7] Height in z : 712.146833 +/- 7.487886 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_7] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 712.238958
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 132.238958 +/- 12.516708 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 713.238958 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_8] Height in z : 711.544167 +/- 7.487886 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_8] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 711.636292
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 131.636292 +/- 12.516708 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 712.636292 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_9] Height in z : 673.518333 +/- 19.781263 um
MetrologySvc::analyzeGlueHeights INFO ----> [ABC_X_9] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 673.610458
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 93.610458 +/- 22.178771 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 674.610458 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [HCC_X_0] Height in z : 705.891333 +/- 2.026211 um
MetrologySvc::analyzeGlueHeights INFO ----> [HCC_X_0] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 705.983458
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 125.983458 +/- 10.232549 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 706.983458 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_0] Height in z : 642.103667 +/- 7.748329 um
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_0] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 642.195792
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 62.195792 +/- 12.674231 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 643.195792 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_1] Height in z : 633.448500 +/- 12.428750 um
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_1] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 633.540625
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 53.540625 +/- 15.971016 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 634.540625 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_2] Height in z : 582.237500 +/- 4.173698 um
MetrologySvc::analyzeGlueHeights INFO ----> [H_X_2] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 582.329625
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 580.000000 +/- 10.000000 extra material : 2.329625 +/- 10.863668 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 583.329625 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [PB_1] Height in z : 638.264800 +/- 9.805829 um
MetrologySvc::analyzeGlueHeights INFO ----> [PB_1] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 638.356925
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 545.000000 +/- 15.000000 extra material : 93.356925 +/- 17.937497 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 639.356925 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [PB_2] Height in z : 606.116000 +/- 0.000000 um
MetrologySvc::analyzeGlueHeights INFO ----> [PB_2] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 606.208125
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 545.000000 +/- 15.000000 extra material : 61.208125 +/- 15.019971 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 607.208125 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [PB_3] Height in z : 633.234750 +/- 20.497500 um
MetrologySvc::analyzeGlueHeights INFO ----> [PB_3] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 633.326875
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 545.000000 +/- 15.000000 extra material : 88.326875 +/- 25.411553 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 634.326875 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [PB_4] Height in z : 606.846250 +/- 25.897250 um
MetrologySvc::analyzeGlueHeights INFO ----> [PB_4] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 606.938375
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 545.000000 +/- 15.000000 extra material : 61.938375 +/- 29.937720 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 607.938375 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeGlueHeights INFO Printing associated surfaces...
MetrologySvc::analyzeGlueHeights INFO ----> [PB_5] Height in z : 629.578000 +/- 4.262440 um
MetrologySvc::analyzeGlueHeights INFO ----> [PB_5] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeGlueHeights INFO ----> Difference in heights : 629.670125
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue assuming 545.000000 +/- 15.000000 extra material : 84.670125 +/- 15.613069 um
MetrologySvc::analyzeGlueHeights INFO ----> Thickeness of glue using derived value -1.000000 from hybrid measurements : 630.670125 um
MetrologySvc::analyzeGlueHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO Printing associated surfaces for total height
MetrologySvc::analyzeTotalHeights INFO ----> [C1] Height in z : 3117.618000 +/- 0.000000 um
MetrologySvc::analyzeTotalHeights INFO ----> [C1] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeTotalHeights INFO ----> Difference in heights : 3117.710125
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO Printing associated surfaces for total height
MetrologySvc::analyzeTotalHeights INFO ----> [C2] Height in z : 3130.443000 +/- 0.000000 um
MetrologySvc::analyzeTotalHeights INFO ----> [C2] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeTotalHeights INFO ----> Difference in heights : 3130.535125
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO Printing associated surfaces for total height
MetrologySvc::analyzeTotalHeights INFO ----> [C3] Height in z : 3016.803000 +/- 0.000000 um
MetrologySvc::analyzeTotalHeights INFO ----> [C3] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeTotalHeights INFO ----> Difference in heights : 3016.895125
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO Printing associated surfaces for total height
MetrologySvc::analyzeTotalHeights INFO ----> [C4] Height in z : 2989.204000 +/- 0.000000 um
MetrologySvc::analyzeTotalHeights INFO ----> [C4] Height in z : -0.092125 +/- 0.774294 um
MetrologySvc::analyzeTotalHeights INFO ----> Difference in heights : 2989.296125
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::analyzeTotalHeights INFO Printing associated surfaces for total height
MetrologySvc::analyzeTotalHeights INFO ----> [Shield] Height in z : 5777.432800 +/- 23.821503 um
MetrologySvc::analyzeTotalHeights INFO ----> [Shield] Height in z : 15.786800 +/- 36.626961 um
MetrologySvc::analyzeTotalHeights INFO ----> Difference in heights : 5761.646000
MetrologySvc::analyzeTotalHeights INFO ----> [Shield] Max height in z (shieldbox) : 5839.359000 +/- 23.821503 um
MetrologySvc::analyzeTotalHeights INFO ----> [Shield] Height in z : 15.786800 +/- 36.626961 um
MetrologySvc::analyzeTotalHeights INFO ----> Max difference in heights (shieldbox) : 5823.572200
MetrologySvc::analyzeTotalHeights INFO ---------------------------------------------------------------------------------
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
IService::UPLOADDB INFO Working on test code MODULE_METROLOGY
MetrologySvc::uploadDB INFO Doing DB upload...
MetrologySvc::writeOutput INFO Writing common output file /home/data/output//MetrologyModules_PROD_LS_v1_interposer//SCIPP-PS_LS-0131/2//Data__SCIPP-PS_LS-0131.txt
MetrologySvc::writeOutput INFO Writing results output file /home/data/output//MetrologyModules_PROD_LS_v1_interposer//SCIPP-PS_LS-0131/2//Results__SCIPP-PS_LS-0131.txt
MetrologySvc::writeOutput INFO Writing common output file /home/data/output//MetrologyModules_PROD_LS_v1_interposer//SCIPP-PS_LS-0131/2//Data__SCIPP-PS_LS-0131.txt
MetrologySvc::writeOutput INFO Writing results output file /home/data/output//MetrologyModules_PROD_LS_v1_interposer//SCIPP-PS_LS-0131/2//Results__SCIPP-PS_LS-0131.txt
IService::log INFO Logging status 0111 for component SCIPP-PS_LS-0131
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PS_LS-0131/MetrologyModules_PROD_LS_v1_interposer-2/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed Summary.pdf...
IService::install INFO Installed TotalStackUp.pdf...
IService::install INFO Installed Positions.pdf...
IService::install INFO Installed Data__SCIPP-PS_LS-0131.txt...
IService::install INFO Installed Results__SCIPP-PS_LS-0131.txt...
IService::install INFO Installed Results.json...
IService::install INFO Installed DB_READY_MODULE_MODULE_METROLOGY.json...
IService::install INFO Installed SCIPP-PS_LS-0131.root...
IService::install INFO Installed status.json...
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_LS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin ignored through users request!
TopControl::monitor INFO Service with algoirthm name MetrologyModules_PROD_SS_v1_thin_interposer ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleLS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ModuleSS_Bow_PPA_v0 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PPB_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name BurnInHybrids_PROD_v2 ignored through users request!
TopControl::monitor INFO Service with algoirthm name ElectricalModules_PPA_v1 ignored through users request!
TopControl::monitor INFO Service with algoirthm name TCModules_PROD_v0 ignored through users request!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=92.477917 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=129.112250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=134.549250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=130.124083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=136.222583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.988083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=133.843083 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.880583 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=132.129417 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=94.955750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 125.528300 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.280350 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.907750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=89.540250 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=60.184750 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.228275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5817.840725 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5817.840725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
Metadata Value
Component type
Operator FMM
Date 2025-07-23T16:21:31.240+00:00
Program version PROD_v1
Instrument SmartScope Flash 250
Wirebonding for SCIPP-PS_LS-0131
WireBondSvc::run INFO Loading group FAILED_HYBRID_TO_PB
WireBondSvc::run INFO Loading group FAILED_MODULE_TO_FRAME
WireBondSvc::run INFO Loading group FAILED_ROW_1
WireBondSvc::run INFO Loading group FAILED_ROW_2
WireBondSvc::run INFO Loading group FAILED_ROW_3
WireBondSvc::run INFO Loading group FAILED_ROW_4
WireBondSvc::run INFO Loading group REPAIRED_HYBRID_TO_PB
WireBondSvc::run INFO Loading group REPAIRED_MODULE_TO_FRAME
WireBondSvc::run INFO Loading group REPAIRED_ROW_1
WireBondSvc::run INFO Loading group REPAIRED_ROW_2
WireBondSvc::run INFO Loading group REPAIRED_ROW_3
WireBondSvc::run INFO Loading group REPAIRED_ROW_4
IService::UPLOADDB INFO Working on test code MODULE_WIRE_BONDING
IService::UPLOADDB INFO Working on test code VISUAL_INSPECTION
IService::log INFO Logging status 0111 for component SCIPP-PS_LS-0131
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PS_LS-0131/ModuleBonding_v1-2/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed DB_READY_MODULE_MODULE_WIRE_BONDING.json...
IService::install INFO Installed DB_READY_MODULE_VISUAL_INSPECTION.json...
IService::install INFO Installed SCIPP-PS_LS-0131.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//ModuleBonding_v1//SCIPP-PS_LS-0132-2.config
IService::next INFO Scheduling ModuleBonding_SCIPP-PS_LS-0132-2.json file to run...
IService::next INFO Writing results to /home/data/output//ModuleBonding_v1//SCIPP-PS_LS-0132/2/
Metadata Value
Date 2025-07-25T21:51:08.473+00:00
Operator QFP, LM
Bonder hk2
Version v1
Bond number Type Comment
Module IV for SCIPP-PS_LS-0131
SensorIVSvc::read INFO Using measurement with voltage 700.360000 and current 0.080570 for current stability calculation
SensorIVSvc::read INFO Using measurement with voltage 700.360000 and current 0.080070 for current stability calculation
SensorIVSvc::read INFO Using measurement with voltage 700.380000 and current 0.078570 for current stability calculation
SensorIVSvc::read INFO Using measurement with voltage 700.380000 and current 0.078370 for current stability calculation
SensorIVSvc::CalculateVBD INFO Average voltage 5.010000, current 0.018400, dIdV 0.003393
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.923797 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 15.010000, current 0.039155, dIdV 0.000763
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.292676 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 25.040001, current 0.045805, dIdV 0.000563
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.307635 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 35.049999, current 0.050110, dIdV 0.000297
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.207455 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 45.040001, current 0.050970, dIdV -0.000124
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.109573 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 55.040001, current 0.050325, dIdV -0.000005
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.005468 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 65.050003, current 0.051080, dIdV 0.000156
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.198268 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 75.059998, current 0.052635, dIdV 0.000155
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.221037 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 85.070000, current 0.053540, dIdV 0.000026
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.041229 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 95.070000, current 0.053900, dIdV 0.000046
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.081298 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 105.080002, current 0.054505, dIdV 0.000075
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.144016 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 115.099998, current 0.054860, dIdV -0.000004
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.008392 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 125.110001, current 0.054815, dIdV -0.000005
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.011389 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 135.130005, current 0.054715, dIdV -0.000015
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.036972 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 145.149994, current 0.056520, dIdV 0.000375
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.963685 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 155.160004, current 0.058880, dIdV 0.000096
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.252978 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 165.169998, current 0.060185, dIdV 0.000165
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.451917 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 175.190002, current 0.060540, dIdV -0.000094
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.271473 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 185.199997, current 0.059995, dIdV -0.000015
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.046304 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 195.229996, current 0.060345, dIdV 0.000084
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.273354 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 205.250000, current 0.061300, dIdV 0.000106
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.355630 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 215.240005, current 0.061560, dIdV -0.000054
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.188807 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 225.240005, current 0.061365, dIdV 0.000015
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.055057 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 235.250000, current 0.061520, dIdV 0.000016
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.061061 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 245.259995, current 0.061925, dIdV 0.000065
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.257439 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 255.259995, current 0.063530, dIdV 0.000256
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.028594 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 265.270020, current 0.064235, dIdV -0.000115
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.473965 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 275.290009, current 0.063990, dIdV 0.000066
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.283370 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 285.299988, current 0.065045, dIdV 0.000145
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.635998 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 295.299988, current 0.065100, dIdV -0.000134
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.607837 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 305.320007, current 0.065605, dIdV 0.000234
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.089312 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 315.169983, current 0.066270, dIdV -0.000106
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.502170 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 325.010010, current 0.066240, dIdV 0.000096
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.470089 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 335.029999, current 0.068595, dIdV 0.000374
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.827910 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 345.029999, current 0.069250, dIdV -0.000244
SensorIVSvc::CalculateVBD INFO V_avg_BD -1.218138 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 355.019989, current 0.067005, dIdV -0.000205
SensorIVSvc::CalculateVBD INFO V_avg_BD -1.086174 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 365.040009, current 0.066810, dIdV 0.000165
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.903386 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 375.059998, current 0.068065, dIdV 0.000085
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.468377 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 385.079987, current 0.068220, dIdV -0.000054
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.303598 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 395.080017, current 0.068480, dIdV 0.000106
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.613999 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 405.059998, current 0.068985, dIdV -0.000005
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.029359 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 415.070007, current 0.069090, dIdV 0.000026
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.155888 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 425.089996, current 0.070545, dIdV 0.000264
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.593649 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 435.110016, current 0.071050, dIdV -0.000164
SensorIVSvc::CalculateVBD INFO V_avg_BD -1.002331 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 445.130005, current 0.071205, dIdV 0.000195
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.216587 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 455.119995, current 0.071060, dIdV -0.000225
SensorIVSvc::CalculateVBD INFO V_avg_BD -1.440421 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 465.119995, current 0.070115, dIdV 0.000035
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.231254 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 475.130005, current 0.070970, dIdV 0.000136
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.912318 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 485.119995, current 0.072630, dIdV 0.000196
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.309149 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 495.130005, current 0.073285, dIdV -0.000065
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.438278 and VBD limit 5.500000
SensorIVSvc::CalculateVBD INFO Average voltage 505.140015, current 0.072690, dIdV -0.000054
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.375259 and VBD limit 5.551400
SensorIVSvc::CalculateVBD INFO Average voltage 515.150024, current 0.072745, dIdV 0.000065
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.459384 and VBD limit 5.651500
SensorIVSvc::CalculateVBD INFO Average voltage 525.169983, current 0.073150, dIdV 0.000016
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.114640 and VBD limit 5.751700
SensorIVSvc::CalculateVBD INFO Average voltage 535.179993, current 0.072555, dIdV -0.000135
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.995787 and VBD limit 5.851800
SensorIVSvc::CalculateVBD INFO Average voltage 545.190002, current 0.072460, dIdV 0.000116
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.871044 and VBD limit 5.951900
SensorIVSvc::CalculateVBD INFO Average voltage 555.200012, current 0.073315, dIdV 0.000055
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.416504 and VBD limit 6.052000
SensorIVSvc::CalculateVBD INFO Average voltage 565.190002, current 0.073820, dIdV 0.000046
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.352897 and VBD limit 6.151900
SensorIVSvc::CalculateVBD INFO Average voltage 575.179993, current 0.074330, dIdV 0.000056
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.433339 and VBD limit 6.251800
SensorIVSvc::CalculateVBD INFO Average voltage 585.179993, current 0.074335, dIdV -0.000055
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.432971 and VBD limit 6.351800
SensorIVSvc::CalculateVBD INFO Average voltage 595.179993, current 0.074940, dIdV 0.000176
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.397807 and VBD limit 6.451800
SensorIVSvc::CalculateVBD INFO Average voltage 605.190002, current 0.076295, dIdV 0.000095
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.752058 and VBD limit 6.551900
SensorIVSvc::CalculateVBD INFO Average voltage 615.210022, current 0.076800, dIdV 0.000006
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.047967 and VBD limit 6.652100
SensorIVSvc::CalculateVBD INFO Average voltage 625.229980, current 0.076255, dIdV -0.000115
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.941026 and VBD limit 6.752300
SensorIVSvc::CalculateVBD INFO Average voltage 635.250000, current 0.075860, dIdV 0.000036
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.300861 and VBD limit 6.852500
SensorIVSvc::CalculateVBD INFO Average voltage 645.250000, current 0.076765, dIdV 0.000145
SensorIVSvc::CalculateVBD INFO V_avg_BD 1.221243 and VBD limit 6.952500
SensorIVSvc::CalculateVBD INFO Average voltage 655.250000, current 0.077720, dIdV 0.000046
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.387048 and VBD limit 7.052500
SensorIVSvc::CalculateVBD INFO Average voltage 665.270020, current 0.077925, dIdV -0.000005
SensorIVSvc::CalculateVBD INFO V_avg_BD -0.042601 and VBD limit 7.152700
SensorIVSvc::CalculateVBD INFO Average voltage 675.299988, current 0.078330, dIdV 0.000086
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.738471 and VBD limit 7.253000
SensorIVSvc::CalculateVBD INFO Average voltage 685.330017, current 0.079185, dIdV 0.000085
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.734189 and VBD limit 7.353300
SensorIVSvc::CalculateVBD INFO Average voltage 695.350037, current 0.080090, dIdV 0.000096
SensorIVSvc::CalculateVBD INFO V_avg_BD 0.831819 and VBD limit 7.453500
SensorIVSvc::CalculateVBD INFO Calculated VBD to be 690.340027
SensorIVSvc::read INFO Mean voltage for current stability 0.079395 calculated with 4 points
SensorIVSvc::read INFO RMS current stability 0.011895
IService::UPLOADDB INFO Working on test code MODULE_IV_PS_BONDED
SensorIVSvc::uploadDB INFO Formatting database upload for MODULE_IV_PS_BONDED and run number 1
SensorIVSvc::writeOutput INFO Writing results output file /home/data/output//SensorIV_Module_PPB_v1//SCIPP-PS_LS-0131/1//20USBML1236258-BONDED_IV_001.dat
SensorIVSvc::getDate INFO Parsing date 2025-07-23T18:11:06.732+00:00...
SensorIVSvc::getDate INFO Year 2025
SensorIVSvc::getDate INFO Month 7
SensorIVSvc::getDate INFO Day 23
SensorIVSvc::getDate INFO Hour 18
SensorIVSvc::getDate INFO Minute 11
SensorIVSvc::getDate INFO Second 6
SensorIVSvc::getDate INFO Offset 0:0
SensorIVSvc::getDate INFO Converted month into string Jul
SensorIVSvc::getDate INFO FINALLY obtained 23 Jul 2025
IService::log INFO Logging status 0111 for component SCIPP-PS_LS-0131
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PS_LS-0131/SensorIV_Module_PPB_v1-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed IVCurve.pdf...
IService::install INFO Installed 20USBML1236258-BONDED_IV_001.dat...
IService::install INFO Installed DB_READY_MODULE_MODULE_IV_PS_BONDED.json...
IService::install INFO Installed SCIPP-PS_LS-0131.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//SensorIV_Module_PPB_v1//SCIPP-PS_LS-0130-1.config
IService::next INFO Scheduling Data_SCIPP-PS_LS-0130-1.txt file to run...
IService::next INFO Writing results to /home/data/output//SensorIV_Module_PPB_v1//SCIPP-PS_LS-0130/1/
Metadata Value
Component type ATLAS18LS
Operator LM
Date 2025-07-23T18:11:06.732+00:00
Institute UCSC
Power supply CAEN_DT1415ET
Temperarture [C] 19.3
Humidity 9.9
Current per area @500V 0.812
Breakdown voltage 690.340
Current stability (RMS@700V) 0.012
Thermal cycling results
TCSvc::getListOfFilesFromDir INFO Scanning for test files 500-9511/20USBP05009511
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files 500-9511/20USBP05009511
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files GPC2328_X_002_A_H0/20USBHX2003085
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files GPC2328_X_002_A_H0/20USBHX2003085
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250728_3_RESPONSE_CURVE_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250728_3_NO_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250728_3_STROBE_DELAY_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250728_3_PEDESTAL_TRIM_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250728_3_3PG_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250728_3_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files VPA38892-W02328/20USBSL0002328
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files VPA38892-W02328/20USBSL0002328
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files SCIPP-PS_LS-0131/20USBML1236258
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files SCIPP-PS_LS-0131/20USBML1236258
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1236258_20250728_3_MODULE_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1236258_TESTED_20250729_3_288_HVSTABILITY.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1236258_20250728_3_MODULE_IV_AMAC_TC.json
TCSvc::read INFO Found 0 results files...
IService::UPLOADDB INFO Working on test code PEDESTAL_TRIM_TC
IService::UPLOADDB INFO Working on test code STROBE_DELAY_TC
IService::UPLOADDB INFO Working on test code RESPONSE_CURVE_TC
IService::UPLOADDB INFO Working on test code NO_TC
IService::UPLOADDB INFO Working on test code MODULE_IV_AMAC_TC
IService::UPLOADDB INFO Working on test code HVSTABILITY
IService::UPLOADDB INFO Working on test code OPEN_CHANNEL_SEARCH_TC
IService::UPLOADDB INFO Working on test code MODULE_TC
IService::log INFO Logging status 0111 for component SCIPP-PS_LS-0131
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PS_LS-0131/TCModules_PROD_v0-1/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed 20USBHX2003085_TC_Noise.pdf...
IService::install INFO Installed 20USBHX2003085_TC_Averages_RC_innse.pdf...
IService::install INFO Installed 20USBHX2003085_TC_Averages_RC_gain.pdf...
IService::install INFO Installed 20USBML1236258_TC_ENV_DATA.pdf...
IService::install INFO Installed 20USBML1236258_TC_HV_STABILITY.pdf...
IService::install INFO Installed 20USBML1236258_TC_AMAC_IV_fast.pdf...
IService::install INFO Installed 20USBML1236258_TC_AMAC_IV.pdf...
IService::install INFO Installed DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003085_20250728_3_PEDESTAL_TRIM_TC.json...
IService::install INFO Installed DB_READY_STROBE_DELAY_TC_SN20USBHX2003085_20250728_3_STROBE_DELAY_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250728_3_RESPONSE_CURVE_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250728_3_3PG_TC.json...
IService::install INFO Installed DB_READY_NO_TC_SN20USBHX2003085_20250728_3_NO_TC.json...
IService::install INFO Installed DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250728_3_MODULE_IV_AMAC_TC.json...
IService::install INFO Installed DB_READY_HVSTABILITY_SN20USBML1236258_TESTED_20250729_3_288_HVSTABILITY.json...
IService::install INFO Installed DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2003085_20250728_3_OPEN_CHANNEL_SEARCH_TC.json...
IService::install INFO Installed DB_READY_MODULE_TC_SN20USBML1236258_20250728_3_MODULE_TC.json...
IService::install INFO Installed SCIPP-PS_LS-0131.root...
IService::install INFO Installed status.json...
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
Metadata Value
Date 2025-07-28T16:53:27.000Z
Duration [hrs] 12.100
Max Humidity [%] 0.775
Max Temperature [C] 22.349
Min Temperature [C] -34.534
Test Station SCIPP_COLDBOX1
ITSDAQ Version itsdaq_23_3_2023-2366-gd570e1aa6
User aw
Test Passed Problems
Open Channel Search True False
Pedestal Trim True False
Strobe Delay True False
3PG True False
Response Curve True False
Noise Occupancy True False
AMAC IV False True
HV Stability True False
Module TC True False
Defect # Description Chip Bank Run Number Chip # Channel(s)
1 3-10 Strip with high gain away 0 0
2 3-10 Strip with high gain away 9 1279
3 3-10 Strip with high gain under 0 0
4 3-115 Strip with high gain away 9 1279
5 3-115 Strip with high gain under 0 0
6 3-115 Strip with high noise under 3 458
7 3-132 Strip with high gain away 0 0
8 3-132 Strip with high gain away 9 1279
9 3-132 Strip with high gain under 0 0
10 3-150 Strip with high gain away 0 0
11 3-150 Strip with high gain away 9 1279
12 3-150 Strip with high gain under 0 0
13 3-168 Strip with high gain away 0 0
14 3-168 Strip with high gain away 9 1279
15 3-168 Strip with high gain under 0 0
16 3-186 Strip with high gain away 0 0
17 3-186 Strip with high gain away 9 1279
18 3-186 Strip with high gain under 0 0
19 3-204 Strip with high gain away 0 0
20 3-204 Strip with high gain away 9 1279
21 3-204 Strip with high gain under 0 0
22 3-222 Strip with high gain away 0 0
23 3-222 Strip with high gain away 9 1279
24 3-222 Strip with high gain under 0 0
25 3-240 Strip with high gain away 0 0
26 3-240 Strip with high gain away 9 1279
27 3-240 Strip with high gain under 0 0
28 3-258 Strip with high gain away 0 0
29 3-258 Strip with high noise away 7 974
30 3-258 Strip with high gain away 9 1279
31 3-258 Strip with high gain under 0 0
32 3-277 Strip with high gain away 0 0
33 3-277 Strip with high gain away 9 1279
34 3-277 Strip with high gain under 0 0
35 3-31 Strip with high noise away 9 1208
36 3-31 Strip with high gain away 9 1279
37 3-31 Strip with high gain under 0 0
38 3-47 Strip with high gain away 0 0
39 3-47 Strip with high gain away 9 1279
40 3-47 Strip with high gain under 0 0
41 3-64 Strip with high gain away 0 0
42 3-64 Strip with high gain away 9 1279
43 3-64 Strip with high gain under 0 0
44 3-81 Strip with high gain away 9 1279
45 3-81 Strip with high noise under 6 825
46 3-98 Strip with high gain away 0 0
47 3-98 Strip with high gain away 9 1279
48 3-98 Strip with high gain under 0 0
Comments
3-10 - 3 defects found affecting 3 strips 3-10 - 1 maximum consecutive defects 3-10 - Cuts from: LS link 0 3-10 - Cuts from: LS link 1 3-31 - 3 defects found affecting 3 strips 3-31 - 1 maximum consecutive defects 3-31 - Cuts from: LS link 0 3-31 - Cuts from: LS link 1 3-47 - 3 defects found affecting 3 strips 3-47 - 1 maximum consecutive defects 3-47 - Cuts from: LS link 0 3-47 - Cuts from: LS link 1 3-64 - 3 defects found affecting 3 strips 3-64 - 1 maximum consecutive defects 3-64 - Cuts from: LS link 0 3-64 - Cuts from: LS link 1 3-81 - 2 defects found affecting 2 strips 3-81 - 1 maximum consecutive defects 3-81 - Cuts from: LS link 0 3-81 - Cuts from: LS link 1 3-98 - 3 defects found affecting 3 strips 3-98 - 1 maximum consecutive defects 3-98 - Cuts from: LS link 0 3-98 - Cuts from: LS link 1 3-115 - 3 defects found affecting 3 strips 3-115 - 1 maximum consecutive defects 3-115 - Cuts from: LS link 0 3-115 - Cuts from: LS link 1 3-132 - 3 defects found affecting 3 strips 3-132 - 1 maximum consecutive defects 3-132 - Cuts from: LS link 0 3-132 - Cuts from: LS link 1 3-150 - 3 defects found affecting 3 strips 3-150 - 1 maximum consecutive defects 3-150 - Cuts from: LS link 0 3-150 - Cuts from: LS link 1 3-168 - 3 defects found affecting 3 strips 3-168 - 1 maximum consecutive defects 3-168 - Cuts from: LS link 0 3-168 - Cuts from: LS link 1 3-186 - 3 defects found affecting 3 strips 3-186 - 1 maximum consecutive defects 3-186 - Cuts from: LS link 0 3-186 - Cuts from: LS link 1 3-204 - 3 defects found affecting 3 strips 3-204 - 1 maximum consecutive defects 3-204 - Cuts from: LS link 0 3-204 - Cuts from: LS link 1 3-222 - 3 defects found affecting 3 strips 3-222 - 1 maximum consecutive defects 3-222 - Cuts from: LS link 0 3-222 - Cuts from: LS link 1 3-240 - 3 defects found affecting 3 strips 3-240 - 1 maximum consecutive defects 3-240 - Cuts from: LS link 0 3-240 - Cuts from: LS link 1 3-258 - 4 defects found affecting 4 strips 3-258 - 1 maximum consecutive defects 3-258 - Cuts from: LS link 0 3-258 - Cuts from: LS link 1 3-277 - 3 defects found affecting 3 strips 3-277 - 1 maximum consecutive defects 3-277 - Cuts from: LS link 0 3-277 - Cuts from: LS link 1
Thermal cycling results
TCSvc::getListOfFilesFromDir INFO Scanning for test files 500-9511/20USBP05009511
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files 500-9511/20USBP05009511
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files GPC2328_X_002_A_H0/20USBHX2003085
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files GPC2328_X_002_A_H0/20USBHX2003085
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250909_3_3PG_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250909_3_NO_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250909_3_PEDESTAL_TRIM_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250909_3_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250909_3_STROBE_DELAY_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250909_3_RESPONSE_CURVE_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files VPA38892-W02328/20USBSL0002328
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files VPA38892-W02328/20USBSL0002328
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files SCIPP-PS_LS-0131/20USBML1236258
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files SCIPP-PS_LS-0131/20USBML1236258
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1236258_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1236258_20250909_3_MODULE_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
IService::UPLOADDB INFO Working on test code PEDESTAL_TRIM_TC
IService::UPLOADDB INFO Working on test code STROBE_DELAY_TC
IService::UPLOADDB INFO Working on test code RESPONSE_CURVE_TC
IService::UPLOADDB INFO Working on test code NO_TC
IService::UPLOADDB INFO Working on test code MODULE_IV_AMAC_TC
IService::UPLOADDB INFO Working on test code HVSTABILITY
IService::UPLOADDB INFO Working on test code OPEN_CHANNEL_SEARCH_TC
IService::UPLOADDB INFO Working on test code MODULE_TC
IService::log INFO Logging status 0111 for component SCIPP-PS_LS-0131
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PS_LS-0131/TCModules_PROD_v0-2/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed 20USBHX2003085_TC_Noise.pdf...
IService::install INFO Installed 20USBHX2003085_TC_Averages_RC_innse.pdf...
IService::install INFO Installed 20USBHX2003085_TC_Averages_RC_gain.pdf...
IService::install INFO Installed 20USBML1236258_TC_AMAC_IV_fast.pdf...
IService::install INFO Installed 20USBML1236258_TC_AMAC_IV.pdf...
IService::install INFO Installed 20USBML1236258_TC_ENV_DATA.pdf...
IService::install INFO Installed DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003085_20250909_3_PEDESTAL_TRIM_TC.json...
IService::install INFO Installed DB_READY_STROBE_DELAY_TC_SN20USBHX2003085_20250909_3_STROBE_DELAY_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250909_3_3PG_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250909_3_RESPONSE_CURVE_TC.json...
IService::install INFO Installed DB_READY_NO_TC_SN20USBHX2003085_20250909_3_NO_TC.json...
IService::install INFO Installed DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250909_3_MODULE_IV_AMAC_TC.json...
IService::install INFO Installed DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2003085_20250909_3_OPEN_CHANNEL_SEARCH_TC.json...
IService::install INFO Installed DB_READY_MODULE_TC_SN20USBML1236258_20250909_3_MODULE_TC.json...
IService::install INFO Installed SCIPP-PS_LS-0131.root...
IService::install INFO Installed status.json...
MetaData::readField INFO Reading file /home/data/upload//TCModules_PROD_v0//SCIPP-PS_LS-0133-1.config
IService::next INFO Scheduling SCIPP-PS_LS-0131-0132-0133-0134_TC_Retest file to run...
IService::next INFO Writing results to /home/data/output//TCModules_PROD_v0//SCIPP-PS_LS-0133/1/
Metadata Value
Date 2025-09-09T15:27:51.000Z
Duration [hrs] 18.400
Max Humidity [%] 0.017
Max Temperature [C] 21.820
Min Temperature [C] -34.203
Test Station SCIPP_COLDBOX1
ITSDAQ Version itsdaq_23_3_2023-2395-g6cf948f0d
User mw
Test Passed Problems
Open Channel Search True False
Pedestal Trim True False
Strobe Delay True False
3PG True False
Response Curve True False
Noise Occupancy True False
AMAC IV True False
HV Stability MISSING! MISSING!
Module TC True False
Defect # Description Chip Bank Run Number Chip # Channel(s)
1 3-10 Strip with high gain away 0 0
2 3-10 Strip with high gain away 9 1279
3 3-10 Strip with high gain under 0 0
4 3-115 Strip with high gain away 0 0
5 3-115 Strip with high gain away 9 1279
6 3-115 Strip with high gain under 0 0
7 3-115 Strip with high noise under 8 1079
8 3-132 Strip with high gain away 0 0
9 3-132 Strip with high gain away 9 1279
10 3-132 Strip with high gain under 0 0
11 3-149 Strip with high noise away 6 811
12 3-149 Strip with high gain away 9 1279
13 3-149 Strip with high gain under 0 0
14 3-166 Strip with high gain away 0 0
15 3-166 Strip with high gain away 9 1279
16 3-166 Strip with high gain under 0 0
17 3-183 Strip with high gain away 9 1279
18 3-183 Strip with high gain under 0 0
19 3-183 Strip with high noise under 3 454
20 3-200 Strip with high gain away 0 0
21 3-200 Strip with high gain away 9 1279
22 3-200 Strip with high gain under 0 0
23 3-217 Strip with high gain away 9 1279
24 3-234 Strip with high gain away 0 0
25 3-234 Strip with high gain away 9 1279
26 3-234 Strip with high gain under 0 0
27 3-251 Strip with high gain away 9 1279
28 3-251 Strip with high noise under 2 309
29 3-268 Strip with high gain away 0 0
30 3-268 Strip with high noise away 5 693
31 3-268 Strip with high gain away 9 1279
32 3-268 Strip with high gain under 0 0
33 3-285 Strip with high gain away 0 0
34 3-285 Strip with high gain away 9 1279
35 3-285 Strip with high gain under 0 0
36 3-302 Strip with high gain away 0 0
37 3-302 Strip with high gain away 9 1279
38 3-302 Strip with high gain under 0 0
39 3-31 Strip with high noise away 0 62
40 3-31 Strip with high gain away 9 1279
41 3-31 Strip with high gain under 0 0
42 3-319 Strip with high gain away 9 1279
43 3-319 Strip with high gain under 0 0
44 3-336 Strip with high gain away 0 0
45 3-336 Strip with high gain away 9 1279
46 3-336 Strip with high gain under 0 0
47 3-353 Strip with high gain away 0 0
48 3-353 Strip with high gain away 9 1279
49 3-353 Strip with high gain under 0 0
50 3-370 Strip with high gain away 0 0
51 3-370 Strip with high gain away 9 1279
52 3-370 Strip with high gain under 0 0
53 3-389 Strip with high gain away 0 0
54 3-389 Strip with high gain away 9 1279
55 3-389 Strip with high gain under 0 0
56 3-47 Strip with high gain away 9 1279
57 3-47 Strip with high gain under 0 0
58 3-47 Strip with high noise under 6 823
59 3-64 Strip with high gain away 0 0
60 3-64 Strip with high noise away 7 968
61 3-64 Strip with high gain away 9 1279
62 3-64 Strip with high gain under 0 0
63 3-81 Strip with high gain away 9 1279
64 3-81 Strip with high gain under 0 0
65 3-98 Strip with high gain away 0 0
66 3-98 Strip with high gain away 9 1279
67 3-98 Strip with high gain under 0 0
Comments
3-10 - 3 defects found affecting 3 strips 3-10 - 1 maximum consecutive defects 3-10 - Cuts from: LS link 0 3-10 - Cuts from: LS link 1 3-31 - 3 defects found affecting 3 strips 3-31 - 1 maximum consecutive defects 3-31 - Cuts from: LS link 0 3-31 - Cuts from: LS link 1 3-47 - 3 defects found affecting 3 strips 3-47 - 1 maximum consecutive defects 3-47 - Cuts from: LS link 0 3-47 - Cuts from: LS link 1 3-64 - 4 defects found affecting 4 strips 3-64 - 1 maximum consecutive defects 3-64 - Cuts from: LS link 0 3-64 - Cuts from: LS link 1 3-81 - 2 defects found affecting 2 strips 3-81 - 1 maximum consecutive defects 3-81 - Cuts from: LS link 0 3-81 - Cuts from: LS link 1 3-98 - 3 defects found affecting 3 strips 3-98 - 1 maximum consecutive defects 3-98 - Cuts from: LS link 0 3-98 - Cuts from: LS link 1 3-115 - 4 defects found affecting 4 strips 3-115 - 1 maximum consecutive defects 3-115 - Cuts from: LS link 0 3-115 - Cuts from: LS link 1 3-132 - 3 defects found affecting 3 strips 3-132 - 1 maximum consecutive defects 3-132 - Cuts from: LS link 0 3-132 - Cuts from: LS link 1 3-149 - 3 defects found affecting 3 strips 3-149 - 1 maximum consecutive defects 3-149 - Cuts from: LS link 0 3-149 - Cuts from: LS link 1 3-166 - 3 defects found affecting 3 strips 3-166 - 1 maximum consecutive defects 3-166 - Cuts from: LS link 0 3-166 - Cuts from: LS link 1 3-183 - 3 defects found affecting 3 strips 3-183 - 1 maximum consecutive defects 3-183 - Cuts from: LS link 0 3-183 - Cuts from: LS link 1 3-200 - 3 defects found affecting 3 strips 3-200 - 1 maximum consecutive defects 3-200 - Cuts from: LS link 0 3-200 - Cuts from: LS link 1 3-217 - 1 defects found affecting 1 strips 3-217 - 1 maximum consecutive defects 3-217 - Cuts from: LS link 0 3-217 - Cuts from: LS link 1 3-234 - 3 defects found affecting 3 strips 3-234 - 1 maximum consecutive defects 3-234 - Cuts from: LS link 0 3-234 - Cuts from: LS link 1 3-251 - 2 defects found affecting 2 strips 3-251 - 1 maximum consecutive defects 3-251 - Cuts from: LS link 0 3-251 - Cuts from: LS link 1 3-268 - 4 defects found affecting 4 strips 3-268 - 1 maximum consecutive defects 3-268 - Cuts from: LS link 0 3-268 - Cuts from: LS link 1 3-285 - 3 defects found affecting 3 strips 3-285 - 1 maximum consecutive defects 3-285 - Cuts from: LS link 0 3-285 - Cuts from: LS link 1 3-302 - 3 defects found affecting 3 strips 3-302 - 1 maximum consecutive defects 3-302 - Cuts from: LS link 0 3-302 - Cuts from: LS link 1 3-319 - 2 defects found affecting 2 strips 3-319 - 1 maximum consecutive defects 3-319 - Cuts from: LS link 0 3-319 - Cuts from: LS link 1 3-336 - 3 defects found affecting 3 strips 3-336 - 1 maximum consecutive defects 3-336 - Cuts from: LS link 0 3-336 - Cuts from: LS link 1 3-353 - 3 defects found affecting 3 strips 3-353 - 1 maximum consecutive defects 3-353 - Cuts from: LS link 0 3-353 - Cuts from: LS link 1 3-370 - 3 defects found affecting 3 strips 3-370 - 1 maximum consecutive defects 3-370 - Cuts from: LS link 0 3-370 - Cuts from: LS link 1 3-389 - 3 defects found affecting 3 strips 3-389 - 1 maximum consecutive defects 3-389 - Cuts from: LS link 0 3-389 - Cuts from: LS link 1
Thermal cycling results
TCSvc::getListOfFilesFromDir INFO Scanning for test files 500-9511/20USBP05009511
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files 500-9511/20USBP05009511
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files GPC2328_X_002_A_H0/20USBHX2003085
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files GPC2328_X_002_A_H0/20USBHX2003085
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250912_2_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250912_2_RESPONSE_CURVE_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250912_2_NO_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250912_2_PEDESTAL_TRIM_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250912_2_STROBE_DELAY_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBHX2003085_20250912_2_3PG_TC.json
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files VPA38892-W02328/20USBSL0002328
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files VPA38892-W02328/20USBSL0002328
TCSvc::read INFO Found 0 results files...
TCSvc::getListOfFilesFromDir INFO Scanning for test files SCIPP-PS_LS-0131/20USBML1236258
TCSvc::getListOfJsonFilesFromDir INFO Scanning for test files SCIPP-PS_LS-0131/20USBML1236258
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1236258_20250912_2_MODULE_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1236258_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::getListOfJsonFilesFromDir INFO Loading json fle SN20USBML1236258_TESTED_20250915_2_966_HVSTABILITY.json
TCSvc::read INFO Found 0 results files...
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
IService::UPLOADDB INFO Working on test code PEDESTAL_TRIM_TC
IService::UPLOADDB INFO Working on test code STROBE_DELAY_TC
IService::UPLOADDB INFO Working on test code RESPONSE_CURVE_TC
IService::UPLOADDB INFO Working on test code NO_TC
IService::UPLOADDB INFO Working on test code MODULE_IV_AMAC_TC
IService::UPLOADDB INFO Working on test code HVSTABILITY
IService::UPLOADDB INFO Working on test code OPEN_CHANNEL_SEARCH_TC
IService::UPLOADDB INFO Working on test code MODULE_TC
IService::log INFO Logging status 0111 for component SCIPP-PS_LS-0131
IService::install INFO Installing output directory to /home/data/modules/SCIPP-PS_LS-0131/TCModules_PROD_v0-3/
IService::install INFO Installed warningLog.txt...
IService::install INFO Installed errorLog.txt...
IService::install INFO Installed infoLog.txt...
IService::install INFO Installed 20USBHX2003085_TC_Noise.pdf...
IService::install INFO Installed 20USBHX2003085_TC_Averages_RC_innse.pdf...
IService::install INFO Installed 20USBHX2003085_TC_Averages_RC_gain.pdf...
IService::install INFO Installed 20USBML1236258_TC_ENV_DATA.pdf...
IService::install INFO Installed 20USBML1236258_TC_AMAC_IV_fast.pdf...
IService::install INFO Installed 20USBML1236258_TC_AMAC_IV.pdf...
IService::install INFO Installed 20USBML1236258_TC_HV_STABILITY.pdf...
IService::install INFO Installed DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003085_20250912_2_PEDESTAL_TRIM_TC.json...
IService::install INFO Installed DB_READY_STROBE_DELAY_TC_SN20USBHX2003085_20250912_2_STROBE_DELAY_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250912_2_RESPONSE_CURVE_TC.json...
IService::install INFO Installed DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250912_2_3PG_TC.json...
IService::install INFO Installed DB_READY_NO_TC_SN20USBHX2003085_20250912_2_NO_TC.json...
IService::install INFO Installed DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250912_2_MODULE_IV_AMAC_TC.json...
IService::install INFO Installed DB_READY_HVSTABILITY_SN20USBML1236258_TESTED_20250915_2_966_HVSTABILITY.json...
IService::install INFO Installed DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2003085_20250912_2_OPEN_CHANNEL_SEARCH_TC.json...
IService::install INFO Installed DB_READY_MODULE_TC_SN20USBML1236258_20250912_2_MODULE_TC.json...
IService::install INFO Installed SCIPP-PS_LS-0131.root...
IService::install INFO Installed status.json...
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=93.785125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=128.141625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=133.878125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=129.436458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=135.221625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=138.422458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=132.981625 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=132.238958 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=131.636292 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=93.610458 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 124.935275 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=93.356925 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=61.208125 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=88.326875 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=61.938375 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 76.207575 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5823.572200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5823.572200 is within allowed range!
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003085_20250728_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2003085_20250728_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250728_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250728_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2003085_20250728_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250728_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003085_20250728_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2003085_20250728_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250728_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250728_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2003085_20250728_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250728_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003085_20250909_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2003085_20250909_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250909_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250909_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2003085_20250909_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2003085_20250909_3_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1236258_20250909_3_MODULE_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003085_20250909_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2003085_20250909_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250909_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250909_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2003085_20250909_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2003085_20250909_3_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1236258_20250909_3_MODULE_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003085_20250912_2_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2003085_20250912_2_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250912_2_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250912_2_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2003085_20250912_2_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003085_20250912_2_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2003085_20250912_2_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250912_2_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003085_20250912_2_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2003085_20250912_2_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250912_2_MODULE_IV_AMAC_TC.json
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=111.163062 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=133.279896 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=139.595063 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=137.383396 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=141.499729 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=140.565896 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=129.015729 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=135.115896 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=135.097396 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=104.211729 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 130.692779 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=109.357462 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=132.838062 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=84.111562 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=82.450312 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 102.189350 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5739.932200 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5739.932200 is within allowed range!
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2002912_20250909_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2002912_20250909_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002912_20250909_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002912_20250909_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2002912_20250909_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236259_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2002912_20250909_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2002912_20250909_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002912_20250909_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002912_20250909_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2002912_20250909_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236259_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2002912_20250912_2_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2002912_20250912_2_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002912_20250912_2_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002912_20250912_2_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2002912_20250912_2_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236259_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2002912_20250912_2_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2002912_20250912_2_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002912_20250912_2_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002912_20250912_2_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2002912_20250912_2_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236259_20250912_2_MODULE_IV_AMAC_TC.json
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=94.899996 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=114.322829 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=125.184496 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=125.328496 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=126.403662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=135.826163 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=131.091662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=128.988329 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=135.882662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=111.872662 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 122.980096 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=94.908563 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=99.771162 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=96.991913 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=91.788912 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 95.865137 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5783.405900 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5783.405900 is within allowed range!
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2002915_20250909_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2002915_20250909_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002915_20250909_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002915_20250909_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2002915_20250909_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236260_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2002915_20250909_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2002915_20250909_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002915_20250909_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002915_20250909_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2002915_20250909_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236260_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2002915_20250912_2_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2002915_20250912_2_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002915_20250912_2_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002915_20250912_2_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2002915_20250912_2_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236260_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2002915_20250912_2_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2002915_20250912_2_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002915_20250912_2_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2002915_20250912_2_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2002915_20250912_2_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236260_20250912_2_MODULE_IV_AMAC_TC.json
MetrologySvc::PassFail_Module INFO Thickness group ABC_X
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_0 point with z=132.900554 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_1 point with z=162.883388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_2 point with z=162.256054 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_3 point with z=164.683221 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_4 point with z=173.573721 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_5 point with z=170.357721 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_6 point with z=171.028221 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_7 point with z=158.733387 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_8 point with z=149.741887 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement ABC_X_9 point with z=132.964388 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 157.912254 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group PB
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 170.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 40.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 70.000000
MetrologySvc::PassFail_Module INFO Including measurement PB_1 point with z=88.222988 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_2 point with z=97.390387 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_3 point with z=115.337637 for module glue height calculation
MetrologySvc::PassFail_Module INFO Including measurement PB_4 point with z=83.543887 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 96.123725 is within allowed range!
MetrologySvc::PassFail_Module INFO Thickness group ShieldBox
MetrologySvc::PassFail_Module INFO >>> Minimum allowed 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum allowed 6110.000000
MetrologySvc::PassFail_Module INFO >>> Minimum with problems 0.000000
MetrologySvc::PassFail_Module INFO >>> Maximum with problems 0.000000
MetrologySvc::PassFail_Module INFO Including measurement Shield point with z=5857.305813 for module glue height calculation
MetrologySvc::PassFail_Module INFO Average value 5857.305813 is within allowed range!
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003104_20250909_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2003104_20250909_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003104_20250909_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003104_20250909_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2003104_20250909_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236261_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2003104_20250909_3_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1236261_20250909_3_MODULE_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003104_20250909_3_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2003104_20250909_3_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003104_20250909_3_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003104_20250909_3_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2003104_20250909_3_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236261_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_OPEN_CHANNEL_SEARCH_TC_SN20USBHX2003104_20250909_3_OPEN_CHANNEL_SEARCH_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_TC_SN20USBML1236261_20250909_3_MODULE_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003104_20250912_2_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2003104_20250912_2_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003104_20250912_2_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003104_20250912_2_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2003104_20250912_2_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236261_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail INFO Reading PassFail status directly from uploaded files
TCSvc::PassFail INFO Loading json fle DB_READY_PEDESTAL_TRIM_TC_SN20USBHX2003104_20250912_2_PEDESTAL_TRIM_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_STROBE_DELAY_TC_SN20USBHX2003104_20250912_2_STROBE_DELAY_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003104_20250912_2_3PG_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_RESPONSE_CURVE_TC_SN20USBHX2003104_20250912_2_RESPONSE_CURVE_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_NO_TC_SN20USBHX2003104_20250912_2_NO_TC.json
TCSvc::PassFail INFO Loading json fle DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236261_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250728_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250728_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236258_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236259_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236259_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236259_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236259_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236260_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236260_20250909_3_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236260_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236260_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236261_20250912_2_MODULE_IV_AMAC_TC.json
TCSvc::PassFail WARNING Failing test detected in DB_READY_MODULE_IV_AMAC_TC_SN20USBML1236261_20250912_2_MODULE_IV_AMAC_TC.json
Metadata Value
Date 2025-09-12T16:34:45.000Z
Duration [hrs] 67.500
Max Humidity [%] 4.567
Max Temperature [C] 21.694
Min Temperature [C] -34.777
Test Station SCIPP_COLDBOX1
ITSDAQ Version itsdaq_23_3_2023-2387-g6025303ba
User aw
Test Passed Problems
Open Channel Search True False
Pedestal Trim True False
Strobe Delay True False
3PG True False
Response Curve True False
Noise Occupancy True False
AMAC IV False False
HV Stability True False
Module TC True False
Defect # Description Chip Bank Run Number Chip # Channel(s)
1 2-101 Strip with high gain away 0 0
2 2-101 Strip with high gain away 9 1279
3 2-101 Strip with high gain under 0 0
4 2-11 Strip with high gain away 0 0
5 2-11 Strip with high gain away 9 1279
6 2-11 Strip with high gain under 0 0
7 2-118 Strip with high noise away 4 599
8 2-118 Strip with high gain away 9 1279
9 2-118 Strip with high gain under 0 0
10 2-136 Strip with high gain away 0 0
11 2-136 Strip with high gain away 9 1279
12 2-136 Strip with high gain under 0 0
13 2-153 Strip with high gain away 9 1279
14 2-153 Strip with high gain under 0 0
15 2-171 Strip with high gain away 0 0
16 2-171 Strip with high gain away 9 1279
17 2-171 Strip with high gain under 0 0
18 2-188 Strip with high gain away 9 1279
19 2-188 Strip with high gain under 0 0
20 2-206 Strip with high gain away 0 0
21 2-206 Strip with high gain away 9 1279
22 2-206 Strip with high gain under 0 0
23 2-223 Strip with high gain away 9 1279
24 2-241 Strip with high gain away 0 0
25 2-241 Strip with high noise away 0 72
26 2-241 Strip with high gain away 9 1279
27 2-241 Strip with high gain under 0 0
28 2-258 Strip with high gain away 9 1279
29 2-276 Strip with high gain away 0 0
30 2-276 Strip with high gain away 9 1279
31 2-276 Strip with high gain under 0 0
32 2-293 Strip with high gain away 9 1279
33 2-293 Strip with high gain under 0 0
34 2-293 Strip with high noise under 2 339
35 2-311 Strip with high gain away 0 0
36 2-311 Strip with high noise away 9 1239
37 2-311 Strip with high gain away 9 1279
38 2-311 Strip with high gain under 0 0
39 2-32 Strip with high noise away 0 0
40 2-32 Strip with high noise away 5 688
41 2-32 Strip with high noise away 9 1208
42 2-32 Strip with high gain away 9 1279
43 2-328 Strip with high gain away 9 1279
44 2-346 Strip with high gain away 0 0
45 2-346 Strip with high gain away 9 1279
46 2-346 Strip with high gain under 0 0
47 2-365 Strip with high gain away 0 0
48 2-365 Strip with high gain away 9 1279
49 2-365 Strip with high gain under 0 0
50 2-365 Strip with high noise under 2 295
51 2-384 Strip with high gain away 0 0
52 2-384 Strip with high gain away 9 1279
53 2-384 Strip with high gain under 0 0
54 2-403 Strip with high gain away 0 0
55 2-403 Strip with high gain away 9 1279
56 2-403 Strip with high gain under 0 0
57 2-422 Strip with high gain away 0 0
58 2-422 Strip with high gain away 9 1279
59 2-422 Strip with high gain under 0 0
60 2-441 Strip with high gain away 0 0
61 2-441 Strip with high gain away 9 1279
62 2-441 Strip with high gain under 0 0
63 2-441 Strip with high noise under 8 1080
64 2-460 Strip with high gain away 0 0
65 2-460 Strip with high gain away 9 1279
66 2-460 Strip with high gain under 0 0
67 2-479 Strip with high gain away 0 0
68 2-479 Strip with high gain away 9 1279
69 2-479 Strip with high gain under 0 0
70 2-48 Strip with high noise away 0 0
71 2-48 Strip with high noise away 5 681
72 2-48 Strip with high gain away 9 1279
73 2-48 Strip with high gain under 0 0
74 2-498 Strip with high gain away 0 0
75 2-498 Strip with high gain away 9 1279
76 2-498 Strip with high gain under 0 0
77 2-517 Strip with high gain away 0 0
78 2-517 Strip with high gain away 9 1279
79 2-517 Strip with high gain under 0 0
80 2-536 Strip with high gain away 0 0
81 2-536 Strip with high gain away 9 1279
82 2-536 Strip with high gain under 0 0
83 2-555 Strip with high gain away 0 0
84 2-555 Strip with high gain away 9 1279
85 2-555 Strip with high gain under 0 0
86 2-574 Strip with high gain away 0 0
87 2-574 Strip with high gain away 9 1279
88 2-574 Strip with high gain under 0 0
89 2-593 Strip with high gain away 0 0
90 2-593 Strip with high gain away 9 1279
91 2-593 Strip with high gain under 0 0
92 2-612 Strip with high gain away 0 0
93 2-612 Strip with high gain away 9 1279
94 2-612 Strip with high gain under 0 0
95 2-631 Strip with high gain away 0 0
96 2-631 Strip with high gain away 9 1279
97 2-631 Strip with high gain under 0 0
98 2-650 Strip with high gain away 0 0
99 2-650 Strip with high gain away 9 1279
100 2-650 Strip with high gain under 0 0
101 2-66 Strip with high gain away 0 0
102 2-66 Strip with high gain away 9 1279
103 2-66 Strip with high gain under 0 0
104 2-66 Strip with high noise under 4 638
105 2-669 Strip with high gain away 0 0
106 2-669 Strip with high gain away 9 1279
107 2-669 Strip with high gain under 0 0
108 2-688 Strip with high gain away 0 0
109 2-688 Strip with high noise away 4 620
110 2-688 Strip with high gain away 9 1279
111 2-688 Strip with high gain under 0 0
112 2-707 Strip with high gain away 0 0
113 2-707 Strip with high gain away 9 1279
114 2-707 Strip with high gain under 0 0
115 2-726 Strip with high gain away 0 0
116 2-726 Strip with high gain away 9 1279
117 2-726 Strip with high gain under 0 0
118 2-745 Strip with high gain away 0 0
119 2-745 Strip with high gain away 9 1279
120 2-745 Strip with high gain under 0 0
121 2-764 Strip with high gain away 0 0
122 2-764 Strip with high gain away 9 1279
123 2-764 Strip with high gain under 0 0
124 2-764 Strip with high noise under 8 1087
125 2-783 Strip with high gain away 0 0
126 2-783 Strip with high gain away 9 1279
127 2-783 Strip with high gain under 0 0
128 2-802 Strip with high gain away 0 0
129 2-802 Strip with high gain away 9 1279
130 2-802 Strip with high gain under 0 0
131 2-802 Strip with high noise under 8 1067
132 2-821 Strip with high gain away 0 0
133 2-821 Strip with high gain away 9 1279
134 2-821 Strip with high gain under 0 0
135 2-83 Strip with high noise away 0 0
136 2-83 Strip with high gain away 9 1279
137 2-840 Strip with high gain away 0 0
138 2-840 Strip with high gain away 9 1279
139 2-840 Strip with high gain under 0 0
140 2-859 Strip with high gain away 0 0
141 2-859 Strip with high gain away 9 1279
142 2-859 Strip with high gain under 0 0
143 2-859 Strip with high noise under 2 312
144 2-878 Strip with high gain away 0 0
145 2-878 Strip with high gain away 9 1279
146 2-878 Strip with high gain under 0 0
147 2-897 Strip with high gain away 0 0
148 2-897 Strip with high gain away 9 1279
149 2-897 Strip with high gain under 0 0
150 2-916 Strip with high gain away 0 0
151 2-916 Strip with high noise away 1 131
152 2-916 Strip with high gain away 9 1279
153 2-916 Strip with high gain under 0 0
154 2-935 Strip with high gain away 0 0
155 2-935 Strip with high gain away 9 1279
156 2-935 Strip with high gain under 0 0
157 2-935 Strip with high noise under 4 638
158 2-955 Strip with high gain away 0 0
159 2-955 Strip with high gain away 9 1279
160 2-955 Strip with high gain under 0 0
161 2-955 Strip with high noise under 8 1071
Comments
2-11 - 3 defects found affecting 3 strips 2-11 - 1 maximum consecutive defects 2-11 - Cuts from: LS link 0 2-11 - Cuts from: LS link 1 2-32 - 4 defects found affecting 4 strips 2-32 - 1 maximum consecutive defects 2-32 - Cuts from: LS link 0 2-32 - Cuts from: LS link 1 2-48 - 4 defects found affecting 4 strips 2-48 - 1 maximum consecutive defects 2-48 - Cuts from: LS link 0 2-48 - Cuts from: LS link 1 2-66 - 4 defects found affecting 4 strips 2-66 - 1 maximum consecutive defects 2-66 - Cuts from: LS link 0 2-66 - Cuts from: LS link 1 2-83 - 2 defects found affecting 2 strips 2-83 - 1 maximum consecutive defects 2-83 - Cuts from: LS link 0 2-83 - Cuts from: LS link 1 2-101 - 3 defects found affecting 3 strips 2-101 - 1 maximum consecutive defects 2-101 - Cuts from: LS link 0 2-101 - Cuts from: LS link 1 2-118 - 3 defects found affecting 3 strips 2-118 - 1 maximum consecutive defects 2-118 - Cuts from: LS link 0 2-118 - Cuts from: LS link 1 2-136 - 3 defects found affecting 3 strips 2-136 - 1 maximum consecutive defects 2-136 - Cuts from: LS link 0 2-136 - Cuts from: LS link 1 2-153 - 2 defects found affecting 2 strips 2-153 - 1 maximum consecutive defects 2-153 - Cuts from: LS link 0 2-153 - Cuts from: LS link 1 2-171 - 3 defects found affecting 3 strips 2-171 - 1 maximum consecutive defects 2-171 - Cuts from: LS link 0 2-171 - Cuts from: LS link 1 2-188 - 2 defects found affecting 2 strips 2-188 - 1 maximum consecutive defects 2-188 - Cuts from: LS link 0 2-188 - Cuts from: LS link 1 2-206 - 3 defects found affecting 3 strips 2-206 - 1 maximum consecutive defects 2-206 - Cuts from: LS link 0 2-206 - Cuts from: LS link 1 2-223 - 1 defects found affecting 1 strips 2-223 - 1 maximum consecutive defects 2-223 - Cuts from: LS link 0 2-223 - Cuts from: LS link 1 2-241 - 4 defects found affecting 4 strips 2-241 - 1 maximum consecutive defects 2-241 - Cuts from: LS link 0 2-241 - Cuts from: LS link 1 2-258 - 1 defects found affecting 1 strips 2-258 - 1 maximum consecutive defects 2-258 - Cuts from: LS link 0 2-258 - Cuts from: LS link 1 2-276 - 3 defects found affecting 3 strips 2-276 - 1 maximum consecutive defects 2-276 - Cuts from: LS link 0 2-276 - Cuts from: LS link 1 2-293 - 3 defects found affecting 3 strips 2-293 - 1 maximum consecutive defects 2-293 - Cuts from: LS link 0 2-293 - Cuts from: LS link 1 2-311 - 4 defects found affecting 4 strips 2-311 - 1 maximum consecutive defects 2-311 - Cuts from: LS link 0 2-311 - Cuts from: LS link 1 2-328 - 1 defects found affecting 1 strips 2-328 - 1 maximum consecutive defects 2-328 - Cuts from: LS link 0 2-328 - Cuts from: LS link 1 2-346 - 3 defects found affecting 3 strips 2-346 - 1 maximum consecutive defects 2-346 - Cuts from: LS link 0 2-346 - Cuts from: LS link 1 2-365 - 4 defects found affecting 4 strips 2-365 - 1 maximum consecutive defects 2-365 - Cuts from: LS link 0 2-365 - Cuts from: LS link 1 2-384 - 3 defects found affecting 3 strips 2-384 - 1 maximum consecutive defects 2-384 - Cuts from: LS link 0 2-384 - Cuts from: LS link 1 2-403 - 3 defects found affecting 3 strips 2-403 - 1 maximum consecutive defects 2-403 - Cuts from: LS link 0 2-403 - Cuts from: LS link 1 2-422 - 3 defects found affecting 3 strips 2-422 - 1 maximum consecutive defects 2-422 - Cuts from: LS link 0 2-422 - Cuts from: LS link 1 2-441 - 4 defects found affecting 4 strips 2-441 - 1 maximum consecutive defects 2-441 - Cuts from: LS link 0 2-441 - Cuts from: LS link 1 2-460 - 3 defects found affecting 3 strips 2-460 - 1 maximum consecutive defects 2-460 - Cuts from: LS link 0 2-460 - Cuts from: LS link 1 2-479 - 3 defects found affecting 3 strips 2-479 - 1 maximum consecutive defects 2-479 - Cuts from: LS link 0 2-479 - Cuts from: LS link 1 2-498 - 3 defects found affecting 3 strips 2-498 - 1 maximum consecutive defects 2-498 - Cuts from: LS link 0 2-498 - Cuts from: LS link 1 2-517 - 3 defects found affecting 3 strips 2-517 - 1 maximum consecutive defects 2-517 - Cuts from: LS link 0 2-517 - Cuts from: LS link 1 2-536 - 3 defects found affecting 3 strips 2-536 - 1 maximum consecutive defects 2-536 - Cuts from: LS link 0 2-536 - Cuts from: LS link 1 2-555 - 3 defects found affecting 3 strips 2-555 - 1 maximum consecutive defects 2-555 - Cuts from: LS link 0 2-555 - Cuts from: LS link 1 2-574 - 3 defects found affecting 3 strips 2-574 - 1 maximum consecutive defects 2-574 - Cuts from: LS link 0 2-574 - Cuts from: LS link 1 2-593 - 3 defects found affecting 3 strips 2-593 - 1 maximum consecutive defects 2-593 - Cuts from: LS link 0 2-593 - Cuts from: LS link 1 2-612 - 3 defects found affecting 3 strips 2-612 - 1 maximum consecutive defects 2-612 - Cuts from: LS link 0 2-612 - Cuts from: LS link 1 2-631 - 3 defects found affecting 3 strips 2-631 - 1 maximum consecutive defects 2-631 - Cuts from: LS link 0 2-631 - Cuts from: LS link 1 2-650 - 3 defects found affecting 3 strips 2-650 - 1 maximum consecutive defects 2-650 - Cuts from: LS link 0 2-650 - Cuts from: LS link 1 2-669 - 3 defects found affecting 3 strips 2-669 - 1 maximum consecutive defects 2-669 - Cuts from: LS link 0 2-669 - Cuts from: LS link 1 2-688 - 4 defects found affecting 4 strips 2-688 - 1 maximum consecutive defects 2-688 - Cuts from: LS link 0 2-688 - Cuts from: LS link 1 2-707 - 3 defects found affecting 3 strips 2-707 - 1 maximum consecutive defects 2-707 - Cuts from: LS link 0 2-707 - Cuts from: LS link 1 2-726 - 3 defects found affecting 3 strips 2-726 - 1 maximum consecutive defects 2-726 - Cuts from: LS link 0 2-726 - Cuts from: LS link 1 2-745 - 3 defects found affecting 3 strips 2-745 - 1 maximum consecutive defects 2-745 - Cuts from: LS link 0 2-745 - Cuts from: LS link 1 2-764 - 4 defects found affecting 4 strips 2-764 - 1 maximum consecutive defects 2-764 - Cuts from: LS link 0 2-764 - Cuts from: LS link 1 2-783 - 3 defects found affecting 3 strips 2-783 - 1 maximum consecutive defects 2-783 - Cuts from: LS link 0 2-783 - Cuts from: LS link 1 2-802 - 4 defects found affecting 4 strips 2-802 - 1 maximum consecutive defects 2-802 - Cuts from: LS link 0 2-802 - Cuts from: LS link 1 2-821 - 3 defects found affecting 3 strips 2-821 - 1 maximum consecutive defects 2-821 - Cuts from: LS link 0 2-821 - Cuts from: LS link 1 2-840 - 3 defects found affecting 3 strips 2-840 - 1 maximum consecutive defects 2-840 - Cuts from: LS link 0 2-840 - Cuts from: LS link 1 2-859 - 4 defects found affecting 4 strips 2-859 - 1 maximum consecutive defects 2-859 - Cuts from: LS link 0 2-859 - Cuts from: LS link 1 2-878 - 3 defects found affecting 3 strips 2-878 - 1 maximum consecutive defects 2-878 - Cuts from: LS link 0 2-878 - Cuts from: LS link 1 2-897 - 3 defects found affecting 3 strips 2-897 - 1 maximum consecutive defects 2-897 - Cuts from: LS link 0 2-897 - Cuts from: LS link 1 2-916 - 4 defects found affecting 4 strips 2-916 - 1 maximum consecutive defects 2-916 - Cuts from: LS link 0 2-916 - Cuts from: LS link 1 2-935 - 4 defects found affecting 4 strips 2-935 - 1 maximum consecutive defects 2-935 - Cuts from: LS link 0 2-935 - Cuts from: LS link 1 2-955 - 4 defects found affecting 4 strips 2-955 - 1 maximum consecutive defects 2-955 - Cuts from: LS link 0 2-955 - Cuts from: LS link 1